Suzuki Quadracer HQ

LT250R Quadracer => LT250R - General Discussion => Topic started by: Michaelaphelan on November 03, 2013, 08:42:02 pm

Title: Re: making 92 swingarm work in a 89 lt 250r frame
Post by: Michaelaphelan on November 05, 2013, 05:59:30 am

thanks for the input on the carrier and shock 8)

Title: Re: making 92 swingarm work in a 89 lt 250r frame
Post by: Iceracer on November 04, 2013, 09:34:47 pm

Shock no, carriers ,are the same from 87 on.

Title: Re: making 92 swingarm work in a 89 lt 250r frame
Post by: Michaelaphelan on November 04, 2013, 09:00:07 pm

thanks for the advice on the swing arm, i was a wondering if the 92 axle carrier would work in a 87-90 swing arm and if the 92 rear shock is compatible with the 89 frame? it seems as if the 92 shock mounts upsidedown compared to the 89 but would it work with the 87-90 swinger , thanks for the help!

Title: Re: making 92 swingarm work in a 89 lt 250r frame
Post by: Motoman991 on November 04, 2013, 05:45:19 am

It will work with lots of cutting and welding.

Title: Re: making 92 swingarm work in a 89 lt 250r frame
Post by: BadMoonRacing500 on November 03, 2013, 11:19:18 pm

Sell the 92 swinger and shock here and get an 87-90 setup, It is a lot easier. The 91-92 set-up should sell fast.

Title: Re: making 92 swingarm work in a 89 lt 250r frame
Post by: Dangerouspower on November 03, 2013, 09:12:06 pm

It won't work without MAJOR frame modification. Not worth it just get a 87-90 swingarm or an aftermarket.

Title: making 92 swingarm work in a 89 lt 250r frame
Post by: Michaelaphelan on November 03, 2013, 08:42:02 pm

i already have a 92 swing arm and shock and want to install it into my 89 lt 250 r frame , not sure how to tackle !