Suzuki Quadracer HQ

LT250R Quadracer => LT250R - Engine => Topic started by: Jsmitty42 on October 17, 2013, 02:25:01 pm

Title: Re: 91 lt250r oil bolt
Post by: GrkGuy on October 17, 2013, 06:19:45 pm

not sure on the 250 but the zilla has to different bolts, short and long.
if you got some bad threads the longer one will work.

Title: Re: 91 lt250r oil bolt
Post by: SBLT500R on October 17, 2013, 04:06:22 pm

try a 1/4 20 tap.  that is a little bit bigger than the stock m6.  sometimes it works sometimes it doesn't.  would depend how stripped it is.  or go bigger or heli coil it

Title: Re: 91 lt250r oil bolt
Post by: Dangerouspower on October 17, 2013, 02:37:12 pm

If its stripped out running a tap through wont change anything. Unless you go to a bigger bolt. Gonna need to heli coil it!

Title: 91 lt250r oil bolt
Post by: Jsmitty42 on October 17, 2013, 02:25:01 pm

ok so the part that the oil bolt screws into is all striped out and i was woundering wha i can do to fix it can you use a tap and die set ?