Suzuki Quadracer HQ

LT250R Quadracer => LT250R - Body / Chassis / Suspension => Topic started by: Motoman-Racerx on October 11, 2013, 03:37:22 pm

Title: Re: rear brake pedal bushings
Post by: Dangerouspower on October 12, 2013, 06:10:00 am

SBLT will you make me a couple new pivots?

Title: Re: rear brake pedal bushings
Post by: SBLT500R on October 11, 2013, 04:01:15 pm

i've done it before.  but you have to replace the pivot pin on the pedal itself aswell.  as that wears too.  if you just put a bushing in the frame it will still be sloppy as the pedal wear like a u in the middle. 

the way i've done it is to open up the frame hole, so its straight, then make and weld in a new pivot on the pedal. 

Title: rear brake pedal bushings
Post by: Motoman-Racerx on October 11, 2013, 03:37:22 pm

does anyone know about gettin a bushing insert for the rear brake lever to stick into frame my brake lever is gettin sloppy i was goin to make a bushing for it but wondering if someone has already done this or know where i could get one.