Suzuki Quadracer HQ
LT250R Quadracer => LT250R - General Discussion => Topic started by: PCS on October 07, 2013, 07:11:03 pm
-
the 250 axle physically fits the ltr carrier so ill assume that the ltr will fit a 250 carrier but if you notice from the pics the ltr sprocket and brake hubs are further apart since the carrier is wider on the ltr. at zilla thon later this week ill try to measure the distance between the sprocket and brake disc themselves. even though the ltr carrier is wider the hubs are not flush and slide into the carrier so it my be more useful info for someone contemplating a swap. if i can find a 250 carrier ill try to get a pic of it with an ltr axle in it.
-
I know for a fact the yfz hubs fit the 87 axles. And bump for the ltr axle as they are cheap and available!
-
I meant the z400 carrier looks like the 250 one. Not sure what an LTR carrier looks like. I'm still gonna compare the z400 and LT carriers
-
They sure do look the same don't they. I bet that answer could be found by comparing part numbers from the RADmfg website. I'll go check it out now. This is a great thread.
I'm now looking for z400 or LTR rear hubs.
-
Wonder if the 250 axle fits in ltr carrier if ltr axle will still work on 250 carrier?..
-
i have a fireball alum axle i just got for my ltr 450 has the same diamter as the lt250r 24 spline axle and since the hubs can be moved towards or away from the center by just changine the size of the spacer, then it shouldnt be to difficult go get an alum axle to fit. when i get home today ill install the 250 axle into an ltr carrier.
-
>:D lets see what happens! Could either of you try swapping them ?
-
Incidentally, JJ&A axles are also 40mm. I forsee some experimenting in the near future!
-
El diablo is running aftermarket z400 hubs on his 250.they will fit if u have a26 spline axle. Dangerous , both the 250 and 450 axles i measure have a center diameter of 40mm.
-
James z400 AND ltr450 will both fit on your 26 spline axle(s). Both will widen the stance too. ltr a little bit more than z400. (Y)
-
Thanks for the offer diablo, but I need 4-lug hubs. What hubs will work? Z400? I'm so confused. I have heard somewhere else that z400 hubs will widen the stance and fit on one of these axles. Wish we could get a solid confirmation on that.
-
Bump for 450 axle in 250 carrier? <1>
-
James, I have a set of 26 spline 5 lug hubs i'll give you a deal on.
-
I sure did miscount. It's 24 on the 87 and 26 on the 88. I think I bent the 87 axle the other day. My wife said my wheel looked wobbly. So which hubs should I buy? Id like some for both axles. Eve the bent 1. Great thread by the way.
-
Ok, there are definitely 26 splines on the axle that came with my 88.
Standby for recount on the 87. The 88 axle is heavier and stronger looking.
-
Exactly.
-
Chuckie, the Honda hubs do not fit the Suzuki. Pitch of the splines are different, the Yamaha ones do fit.maybe if u have some worn out Honda hubs and a hammer they will fit.
-
you miscounted.
-
My 87 and 88 250 axles are completely different. Different splines, different taper and different hub nut sizes, but they both fit in my carrier. I'd like a set of 4-lug hubs to fit em. I thought I counted 26 on one and 27 on the other, but maybe miscounted. I'll look again.
-
We used a 86-86 rear axle and the old style 400ex stock rear hub and it would not fit.
-
Cj that is incorrect on the 400ex hubs on the 24 spline axles spence and I proved that one wrong.
Well i skipped school today so i'll go out and try it for myself because I put my 200X hub on my 24 spline 87 axle, and it fit,,, i know the 400EX fits the 90/110/200X/1st-2nd gen R's. So We shall see
-
Cj that is incorrect on the 400ex hubs on the 24 spline axles spence and I proved that one wrong.
-
For the 24 spline rear axles. Honda 200X, 300EX, 400EX and 450R hubs fit. The 300EX, 400EX and 450R hubs will give you about +3" in the rear.
The 4x4 Suzuki LT250F has 24 spline 5-lug hubs.
I have a bastard year 24 spline axle in my 87 as well. And I think the same damn axle in my 88.
I think the LTR, KFX 450 hubs should fit the 26 spline axle, but I'm not positive on this because I only heard from one KFX450R owner that he swapped hubs.
-
or put a banshee setup on it swinger and all
-
Ice racer what about using a complete 450 rear axle in a 250 carrier ?
-
NOT necessarilly,
Look at where the splines are on the axle, there too far apart for the bearings to ride and the hubs will push the disk and sprocket will be way out of line. The hubs could work but I wouldn't buy them new just yet.
Maybe look at 250r/400ex450r stuff. unless you change the whole carrier your going to have a hard time, may not be impossible but don't look good so far. keep trying
-
So If I want billet sprocket and brake hubs just order ltr450 hubs?
-
Does the 450 axle fit in the 250 carrier ?
-
Good comparison! Can you post up the dimensions & weights of these axles?
-
Here is a pic of a 250,500, and 450 axle in that order from top to bottom. 450 sprocket/brake hubs fit the 250. Rear hub axle nut from the 450 fits the 500. The 250 axle is a24 spline so banshee hubs fit.the 250 axle is from an 87. The widest axle its the 450 and doesnt use threads on the axle to lock in the brake and sprocket hubs as used in the 250/500 axle.