Suzuki Quadracer HQ

LT250R Quadracer => LT250R - Body / Chassis / Suspension => Topic started by: Sparky on September 28, 2013, 03:26:57 pm

Title: Re: 1986 Swing arm upgrade
Post by: Iceracer on September 29, 2013, 06:10:32 am

There's noting wrong with that rear end setup. The problem is is its setup for a 120 lb rider spring and valving.

Title: Re: 1986 Swing arm upgrade
Post by: Sparky on September 28, 2013, 10:07:15 pm

Lol
Ya I pulled the stock shock off so I could send it off to get rebuilt, it's a Warrior front shock. I know it's not right but it holds it up for the time being.
So if I understand correctly I will have to make the upper yolk/ shock mount and is there a lower shock linkage mount also that needs fab'd up?
Is there another option for me? My swing arm has a bunch of spider cracks. Or was this shock setup terrible to begin with? This is the first one I have ever owned.

Title: Re: 1986 Swing arm upgrade
Post by: Iceracer on September 28, 2013, 05:06:48 pm

I don't know what shock is in that red end on the earlier machine but its not stock or rite.

Title: Re: 1986 Swing arm upgrade
Post by: LT250RWV on September 28, 2013, 04:43:39 pm

Alot you have to redo the frame and you will need a 91 92 airbox and the air to carb boot

Title: 1986 Swing arm upgrade
Post by: Sparky on September 28, 2013, 03:26:57 pm

Has anyone changed out this
(http://i1071.photobucket.com/albums/u509/sparkymichigan/null_zps0bbd7f44.jpg)
For this
(http://i1071.photobucket.com/albums/u509/sparkymichigan/null_zps72e4a514.jpg)
And what type of modification does it take to make it work?