Suzuki Quadracer HQ

LT500R Quadracer => LT500R - Engine => Topic started by: Buckeye513 on September 03, 2013, 08:18:08 pm

Title: Re: Diagnosing ignition timing
Post by: Q2W on September 04, 2013, 10:46:00 am

you can test the stator.  Don't think there is a way to test the cdi without swapping to one you know works.

With a volt meter:

Black/Red to Black/White= 375 ohms
Blue to Black/White= 120 ohms

Test the pickup too.  I can't remember the ohms for it.  Manual will have it.

Title: Diagnosing ignition timing
Post by: Buckeye513 on September 03, 2013, 08:18:08 pm

Pretty sure I have a timing or ignition issue. Need to know how I go about diagnosing what's causing the problem so I can fix it. My gear timing points are lined up my stator is on the marks for stock ignition timing. I don't know where to go from here. Gonna have motoman lend me his stator and cdi to test but is there a way I can check them without replacing them.