Suzuki Quadracer HQ
Classifieds / E Bay / Craigslist => Items Selling => Topic started by: OneShotKyle on August 18, 2013, 10:30:52 am
-
100% all sold.
+k2
-
I gotta start reading more
)
Sorry that's kinda far to pick up I'm abit above baja in so cal!
-
if you pick it up....
I don't have the time to ship anything
-
Would you sell the nose piece separate?
-
all pm's answered and all the above still available
-
been a while since I have had time to get on here. this is the parts I have left. I will sell all listed part's picked up only in central Oregon for 600.00. no time for any shipping, sorry fellas. time for me to move on with it and let it collect dust in your garage.
****parts left****
88 lightened no link titled frame
rear oem grab bar
all oem plastic and cascade innovation seat
basket case spare lower end
and some misc small parts
-
****parts left****
88 titled frame
rear oem grab bar
all oem plastic and cascade innovation seat
custom stem w/ drag bars
basket case spare lower end
and some misc small parts
-
****SOLD****
complete 540hrd sold
+6 ladder swingarm sold
lectron and billet intake sold
front marvin hillshooter sold
pwr radiator sold
pingel fuel valve sold
3 spoke hub's,rotor's,wheel's sold
drQ pipe sold
billet pegs sold
jj and a carrier sold
kickstarter w/ bolt sold
rear brake lever sold
fuel tank and oem valve sold
radiator hoses with clamps sold
a-arms w tie rods, caliper's and s.s. lines sold
JJ and A axle with banshee rotor hub and wave rotor sold.
not much left except
88 titled frame
rear oem grab bar
all oem plastic and cascade innovation seat
custom stem w/ drag bars
basket case spare lower end
and some misc small parts
-
stocker. nothing special and probly all dried out so it's goin in the trash. I used Honda trx450 on my build anyways
-
What do you have for a front master cylinder?
-
****SOLD****
complete 540hrd sold
+6 ladder swingarm sold
lectron and billet intake sold
front marvin hillshooter sold
pwr radiator sold
pingel fuel valve sold
3 spoke hub's,rotor's,wheel's sold
drQ pipe sold
billet pegs sold
jj and a carrier sold
kickstarter w/ bolt sold
rear brake lever sold
fuel tank and oem valve sold
radiator hoses with clamps sold
-
88 bike
-
what year is this bike? a arms and ect still available?
-
PM me with price on engine.Though pretty sure shipping will be a **** up here.:(
-
replied to all.... got over 1100 views that must mean somethin
-
Frame available?
Is it gusseted? dings? dents? straight? Price?
Are the yellow plastics available? condition? Price?
-
What are you asking for the engine?
-
offers? trades?
-
only 04/05 trx450 stuff. don't wanna go any slower
-
How bout an 04 400EX engine on trade? Fresh top end!
Lol worth a try though...
-
looking for 04 05 trx450 and parts fox floats. will entertain trades
-
i need the engine..... i know i cant afford it though :'(
-
bump it up
-
****SOLD****
lectron and billet intake sold
front marvin hillshooter sold
pwr radiator sold
pingel fuel valve sold
3 spoke hub's,rotor's,wheel's sold
drQ pipe sold
billet pegs sold
jj and a carrier sold
kickstarter w/ bolt sold
rear brake lever sold
fuel tank and oem valve sold
radiator hoses with clamps sold
****to be listed****
540hrd
plastic
frame
seat
and some other small misc stuff
-
interested in 04-05 trx450r trades for my zilla stuff also fella's
-
ttt
-
****SOLD****
lectron and billet intake sold
front marvin hillshooter sold
pwr radiator sold
pingel fuel valve sold
3 spoke hub's,rotor's,wheel's sold
drQ pipe sold
billet pegs sold
jj and a carrier sold
kickstarter w/ bolt sold
****available on ebay*****
a-arms
tie rods
swingarm
steering stem
radiator hoses
rear brake lever
****to be listed****
540hrd
plastic
frame
seat
and some other small misc stuff
-
Would you sell just the front race cuts? And possibly the hood with it?
-
what about the frame?
what about it? it's for sale too. title and all
-
what about the frame?
-
pics sent Serg500
don't miss out on all the parts on eBay
-
PIc's.......
-
****SOLD****
lectron and billet intake sold
front marvin hillshooter sold
pwr radiator sold
pingel fuel valve sold
3 spoke hub's,rotor's,wheel's sold
drQ pipe sold
****available on ebay*****
a-arms
tie rods
swingarm
steering stem
billet pegs
radiator hoses
kickstarter w/bolt
rear brake lever
jj&a bearing carrier w/caliper bracket
****to be listed****
540hrd
plastic
frame
seat
and some other small misc stuff
-
on eBay now
9 items listed under the username oneshotkyle. bid with confidence. more to get listed
engine
frame
plastic
seat etc still to come....................
-
If you till have the a-arms and tie rods will you take $425.00 for them?
-
misc. parts listed on ebay
-
JJ&A bare axle with key ways
JJ&A bearing carrier
JJ&A banshee rotor hub and wave rotor
this is all that's left from complete axle
-
plastic pic request
-
whats left. plastic,frame,seat and full 540hrd built by pirana pete not in pics
-
axle comes with all pictured including tools.
-
****SOLD****
lectron and billet intake sold
front marvin hillshooter sold
pwr radiator sold
pingel fuel valve sold
3 spoke hub's,rotor's,wheel's sold
drQ pipe sold
****available*****
a-arms
tie rods
swingarm
jj and a axle
steering stem
complete 540hrd
oem plastic
and lots of little misc. just ask
-
complete 34" play axle with banshee rotor hub, wave rotor,Honda sprocket hub and all the appropriate spacers and 3 spoke wheel hubs and carrier bearing. all about 10 hrs use all JJ&A racing parts. lots of messages about this so here ya go. nine hundred worth of parts for a hell of a price. 600.00 shipped
-
wish i had the chedda right now for the axle set up
-
still have the drag stem? if so price and pics?
-
pipe sold
-
Any word on the pipe?
-
lectron and billet intake sold
front marvin hillshooter sold
pwr radiator sold
pingel fuel valve sold
3 spoke hub's,rotor's,wheel's sold
-
How much for axle ?
-
Are the carrier and jj&a axle already gone? And excuse my stupidity but is that a banshee carrier?
axle and carrier going into another bike for my son. I only use Honda style carriers no matter what build.
I was wrong on carrier. yes it is banshee style carrier. the axle and carrier will be for sale also. I hate being wrong. but I need a Honda style for my sons bike.
-
front 3 spoke's with wave rotor's and 3 spoke wheels***SPF to Rangercrt***
-
lectron and billet intake sold
front marvin hillshooter sold
pwr radiator sold
pingel fuel valve sold
-
v1 yep still available. 400.00 you pay the ride.
-
Q pipe still for sale?V1 or V2 and how much are you asking?
-
Are the carrier and jj&a axle already gone? And excuse my stupidity but is that a banshee carrier?
axle and carrier going into another bike for my son. I only use Honda style carriers no matter what build.
-
Are the carrier and jj&a axle already gone? And excuse my stupidity but is that a banshee carrier?
-
best pick I have of swingarm at this time. to busy to do much but work eat sleep.
plus 6 swingarm no link, will come with allthe front pivot bearings,seals and pivot bolt. black chain slider and chain guide also. 500 shipped
it's still up in the air who built this. this and one other drQ had built by who? just have never seen metaltech build a ladder style.
-
Do you have a 6 bolt stock boot. Thanks Brian
im guessing you mean intake? no
-
i remember this build... used a metaltech and a 40mm carrier for banshee or jj&a
can't remember metaltech making a ladder swingarm? can you show me where you read that?
-
What type of swing arm, how long, what carrier, price? any pics
-
That seat is sweet. Just need a bike to put it on.
-
Do you have a 6 bolt stock boot. Thanks Brian
-
Its a shame to see this bike parted out it was a beautiful machine! But they are worth more in pieces when everything is aftermarket.
-
a-arms and swingarm still available, buyer backed out
-
all pm's answered
-
Ok let me know when you're selling the swinger and that radiator if its getting sold.
-
Hey do you have a stock 6 bolt reed boot and the boot that goes from the airbox to the carb.
-
lectron and billet intake sold
a-arms and swingarm SPF
I am trying just to list parts in small lots so I don't get lost in all the pm's and shipping b.s.
more to come as things sell off......
-
i remember this build... used a metaltech and a 40mm carrier for banshee or jj&a
-
What kind of ladder swinger and what kind of carrier and how much?
-
central Oregon. not interested in splitting engine up. there is nothing that hasn't been done to engine. less than 10hrs on complete build.
-
Where are you located? And would you consider selling just the bottom end of the motor?
-
all prices are o.b.o. and will take consideration to fair offer's. remember I have theses as shipped prices and some of the large thing's are expensive to ship. there is a lot more to get listed from this bike. complete 540hrd engine/6+ladder swingarm/oem racecut plastic's/Q pipe/48hv/drag stem/ lectron and more.
-
excellent re upholstered by cascade inovations
150.00 shipped
-
oem grab bar powder coated ford blue
85.00 shipped
-
used billet aluminum lt500 pegs with all mounting hardware.
150.00 shipped
-
here is a set of one off JJandA 3 spoke hubs with wave rotors and aluminum bearing cap's(cap's were used when I got them and are scuffed on the ends. these are made up to use stock lt500 spindles/calipers and cut a lot of weight. can sell with 3 spoke wheels in picture for another 100.00
400.00 shipped
-
next up is a set of aluminum tie rod's with hiem's
100.00 shipped
-
first off is a full set of chromoly +3 forward stock width a-arm's with bushing's, s.s. bolt's, new ball joint's (rubber caps are cracking) qty 4 aluminum brake line clamp's and the spindles. arm's were powder coated ford blue. less than 10hrs on these tired of it sitting.
500.00 for all shipped.