Suzuki Quadracer HQ

LT500R Quadracer => LT500R- Exhaust => Topic started by: Rainman56 on July 31, 2013, 07:55:28 am

Title: Re: Aaen/Q pipe silencer
Post by: Dirtzilla on July 31, 2013, 04:07:36 pm

Rainman, the inside diameter of the Aaen silencer is 1.38 to 1.39 inches or 35 to 35.50 mm
i got a spare silencer here

Title: Re: Aaen/Q pipe silencer
Post by: Rainman56 on July 31, 2013, 08:28:23 am

Ok,much appreciated guys. +k2

Title: Re: Aaen/Q pipe silencer
Post by: Dezsled on July 31, 2013, 08:24:27 am

The Aaen/v2 stinger inside diameter might be close enough to work w/ the fmf silencer.

Pics were from the pipe dyno testing day two.

iirc the hpr pipe had a larger i.d. stinger, and v1 & 2 silencers were not interchangeable.

This probably doesn't help out much

Title: Re: Aaen/Q pipe silencer
Post by: MotorGeek - Jerry Hall on July 31, 2013, 08:24:10 am

Quote from: Rainman56 on July 31, 2013, 07:55:28 am

Just curious if the Aaen or Q pipe will work/fit with an FMF silencer for the LT500,s?

The FMF silencer will fit the OEM pipe and the Paul turner pipe but will not fit the Aaen, Q1, Q2, or HPR 19.  Each of these pipes have their own unique silencer.

Title: Re: Aaen/Q pipe silencer
Post by: Rainman56 on July 31, 2013, 08:08:56 am

I,ll have to take a close look at your pics.Basically I have a new FMF silencer and a PT pipe.Thinking about switching to one of the heavy hitter pipes.Wanting to know if I were to buy just an Aaen pipe/no silencer will it fit up to my FMF and if so does the FMF silencer "flow" enough to avoid burndown?

Title: Re: Aaen/Q pipe silencer
Post by: Dezsled on July 31, 2013, 08:01:57 am

Pics of both v1 top v2 bottom

(http://i83.photobucket.com/albums/j300/Dezsled/photo86.jpg)

(http://i83.photobucket.com/albums/j300/Dezsled/photo85.jpg)

Title: Aaen/Q pipe silencer
Post by: Rainman56 on July 31, 2013, 07:55:28 am

Just curious if the Aaen or Q pipe will work/fit with an FMF silencer for the LT500,s?