Suzuki Quadracer HQ

Suzuki Quadracer HQ Discussion => Suzuki Quadracer HQ - General Discussion => Topic started by: QuadMan8 on July 18, 2013, 09:38:13 pm

Title: Re: Look at the plastic on this zilla ???
Post by: PCS on July 20, 2013, 08:10:42 pm

Zilla frame is too high up front bc of the way the radiator mounts vs the ltr that tucks the radiator lower and more centered

Title: Re: Look at the plastic on this zilla ???
Post by: QuadMan8 on July 20, 2013, 06:27:23 pm

Yuck, remind me to never do that plastic conversion.

Title: Re: Look at the plastic on this zilla ???
Post by: Dangerouspower on July 20, 2013, 05:58:52 pm

Thanks for doin that bud! But yikes it looks terrible up front!!  :(

Title: Re: Look at the plastic on this zilla ???
Post by: PCS on July 20, 2013, 05:47:24 pm

Pic is here

Title: Re: Look at the plastic on this zilla ???
Post by: Chuckie25 on July 20, 2013, 01:05:59 pm

The Z plastics on a 250 would look good

DVX plastics on one look great surprisingly

Title: Re: Look at the plastic on this zilla ???
Post by: PCS on July 20, 2013, 12:51:07 pm

Maybe I'll take a photo for u dangerous, i have 2 zillas and an Ltr sitting outside. Ill take the plastics off and see what i come up with

Title: Re: Look at the plastic on this zilla ???
Post by: Sho-N-Off on July 20, 2013, 07:46:48 am

looks like theyre z400 plastics,I think the hole on the right front fender is for the reverse knob

Title: Re: Look at the plastic on this zilla ???
Post by: Dangerouspower on July 20, 2013, 07:44:48 am

Now that you point it out... So maybe their is hope the uncut LTR plastics would look good!  S~

Title: Re: Look at the plastic on this zilla ???
Post by: JayTater on July 19, 2013, 06:19:11 pm

Quote from: PCS on July 19, 2013, 05:44:11 pm

doesnt look sharp enough for an ltr plastic, looks like an ltz plastic, the seat and rear plastics arent ltr either. on the right side of the front plastics their is a hole cut for what looks like a reverse switch, not on the ltr which has the key hole on the left side.

I agree with PCS, looks more like Z skins.

Title: Re: Look at the plastic on this zilla ???
Post by: PCS on July 19, 2013, 05:44:11 pm

doesnt look sharp enough for an ltr plastic, looks like an ltz plastic, the seat and rear plastics arent ltr either. on the right side of the front plastics their is a hole cut for what looks like a reverse switch, not on the ltr which has the key hole on the left side.

Title: Re: Look at the plastic on this zilla ???
Post by: Dezsled on July 19, 2013, 05:35:56 pm

LTR plastic looks shrunken down on the Zilla...

I'd like to take a spin on that machine.

Title: Re: Look at the plastic on this zilla ???
Post by: Rainman56 on July 19, 2013, 05:13:12 pm

Gotta side with the guys liking the Zilla plastics.The ltr plastics just don,t look right.

Title: Re: Look at the plastic on this zilla ???
Post by: Dangerouspower on July 19, 2013, 03:21:38 pm

That's what I was thinking about the front Glamis.

Title: Re: Look at the plastic on this zilla ???
Post by: Glamisrider on July 19, 2013, 12:05:28 pm

Zilla all the way with LTR plastics on it which IMHO are too small for the frame

Title: Re: Look at the plastic on this zilla ???
Post by: Dangerouspower on July 19, 2013, 06:41:41 am

Shouldve left them stock. I really like the stock LTR plastics but not the headlight, but the aftermarket beaks they sell are pretty sweet.
Am I having optical illusion or is that a Z front end?..

Title: Re: Look at the plastic on this zilla ???
Post by: Quadracer87Man on July 18, 2013, 10:52:36 pm

I agree with Cunningham, the ltr plastic looks butchered in them pics

Title: Re: Look at the plastic on this zilla ???
Post by: Cunningham_821 on July 18, 2013, 10:08:40 pm

Look like ltr. i think i like cut zilla fenders better.

Title: Look at the plastic on this zilla ???
Post by: QuadMan8 on July 18, 2013, 09:38:13 pm

http://www.ebay.com/itm/87-Lt500r-engine-motor-complete-Quadzilla-2-Stroke-Lt500-/271242397388

This guy is selling just the motor but he included a picture of his zilla.  I do like the plastic.   What is that off of.  Is it LTR 450 plastic?
Anyone try this and what is involved to get it to fit?