Suzuki Quadracer HQ

LT250R Quadracer => LT250R - Body / Chassis / Suspension => Topic started by: CrustyOreo on July 15, 2013, 07:18:06 pm

Title: Re: Swing arm change hints
Post by: CrustyOreo on July 15, 2013, 08:49:49 pm

Sorry for the vague OP.  -->
The bikes an 86. I need to swap the rear rotor over as well. I have a complete swing arm with axle installed.

Title: Re: Swing arm change hints
Post by: Chuckie25 on July 15, 2013, 07:49:09 pm

Put the rear end all together in the new swinger, leave the shock and dog bone hung off the cantilever and you can just roll the swinger an rear end into the quad

Title: Re: Swing arm change hints
Post by: Kyle T on July 15, 2013, 07:32:39 pm

Nice try hiding that Dezzie! _^_

Title: Re: Swing arm change hints
Post by: Dezsled on July 15, 2013, 07:24:24 pm

Don't put the linkage eccentric in upside down, like I did.. Haha!

Title: Swing arm change hints
Post by: CrustyOreo on July 15, 2013, 07:18:06 pm

I'm gonna be changing my swing arm tomorrow to replace the **** one.
Any hints? I'm going to replace the bearings too.

Thanks1