Suzuki Quadracer HQ

LT500R Quadracer => LT500R - Engine => Topic started by: Zilla273 on July 03, 2013, 10:56:38 pm

Title: Re: 300ft times
Post by: Buckeye513 on July 04, 2013, 02:46:30 pm

Cunningham what gearing do you run for 300ft?

Title: Re: 300ft times
Post by: MotorGeek - Jerry Hall on July 04, 2013, 10:16:29 am

Quote from: Cunningham_821 on July 04, 2013, 08:46:11 am

To answer your ? yea you should be able to run under 5's imo. i normally run 500ft one thing i noticed in 300 is gearing is the biggest factor.

Chassis set up, tires, gearing........everything becomes more critical when the track is shortened.

Title: Re: 300ft times
Post by: Zilla273 on July 04, 2013, 10:09:43 am

nice, 4.5 is vary good, im gona shoot for 4.9 to 5.1s just so im not to disappointed lol :)).

Title: Re: 300ft times
Post by: Cunningham_821 on July 04, 2013, 08:46:11 am

To answer your ? yea you should be able to run under 5's imo. i normally run 500ft one thing i noticed in 300 is gearing is the biggest factor.

Title: Re: 300ft times
Post by: Cunningham_821 on July 04, 2013, 08:43:39 am

Hard to tell i got 4.5 out of my bike before the tranny started making all kinda noise and i packed it in. I was using 12 extremes i think but i also have a bar.

Title: Re: 300ft times
Post by: Zilla273 on July 03, 2013, 11:05:53 pm

fastest bike last yr I seen personally was a 450r with bla bla bla done, stock chassis with longer swinger was 5.00 im curious if I can beat it, Ik I would in the long run

Title: 300ft times
Post by: Zilla273 on July 03, 2013, 10:56:38 pm

so im gona do some sand drags at a local atv track in acpl months, any takers on what my times will be??? hpr top end on paper is 75-79hp, the track is straight sand, will have 9 paddle haulers, will be tryn several gear combos. 6inch swing arm, what should I be able to achieve for time D?