Suzuki Quadracer HQ

Classifieds / E Bay / Craigslist => Items Wanted => Topic started by: Rider414 on June 30, 2013, 10:55:21 am

Title: Re: WTB: Rear Axle Carrier - (4) Bolts
Post by: Rider414 on July 12, 2013, 07:15:41 am

Derrick has taken care of me on these - thank you.

I love forum's like these with like minded enthusiast helping each other out.

Title: Re: WTB: Rear Axle Carrier - (4) Bolts
Post by: Aarona40 on July 12, 2013, 07:08:01 am

I have four brand new SS ones.  Not gonna use them.
Aaron

Title: Re: WTB: Rear Axle Carrier - (4) Bolts
Post by: Buckeye513 on July 12, 2013, 06:21:03 am

Bret OEM isn't $15 a bolt it's like $15-$17 plus shipping for the three available bolts and nuts.

Title: Re: WTB: Rear Axle Carrier - (4) Bolts
Post by: Rider414 on July 12, 2013, 05:36:53 am

Thanks for the resource!!  +k2

Title: Re: WTB: Rear Axle Carrier - (4) Bolts
Post by: Glamisrider on July 11, 2013, 10:30:12 pm

Call these guys they'll have your bolt in 10.9 and should be cheaper than OEM at $15 a bolt

You'll have to check with them on shipping.

http://www.hillcofasteners.com/default.aspx

Title: Re: WTB: Rear Axle Carrier - (4) Bolts
Post by: Rider414 on June 30, 2013, 04:19:17 pm

Sounds good man - Ill PM you.

Title: Re: WTB: Rear Axle Carrier - (4) Bolts
Post by: Buckeye513 on June 30, 2013, 03:14:49 pm

You can't get the full set new the forward left bolt has been discontinued from Suzuki. You can only get the three bolts in my picture new. I'll even give them a cleaner bath so they'll look close to new before I send them.

Title: Re: WTB: Rear Axle Carrier - (4) Bolts
Post by: Rider414 on June 30, 2013, 02:35:17 pm

I could not get anything long enough in metric from my local place.

Ill see if someone has the full set or Ill order new.

Title: Re: WTB: Rear Axle Carrier - (4) Bolts
Post by: Glamisrider on June 30, 2013, 12:52:32 pm

If not you can always upgrade the bolts with grade 10.9 from your local fastener warehouse.

Title: Re: WTB: Rear Axle Carrier - (4) Bolts
Post by: Buckeye513 on June 30, 2013, 12:38:21 pm

I have 3 of them that I replaced with new OEM ones and I cleaned up the 4th one because its discontinued. Pay the shipping and I'll send them your way. Or if you want to order new I got the new bolts and nuts from Jason for like $15+ shipping.

They're the three that go where the three brand new ones are pictured on my swinger. The duller one is the one that's discontinued. I soaked it for about an hour in trane condenser coil cleaner to remove all the grime and get it looking like that.

Title: WTB: Rear Axle Carrier - (4) Bolts
Post by: Rider414 on June 30, 2013, 10:55:21 am

If anyone can help with my 87 Zilla rescue. I need the (4) OEM bolts that hold the axle carrier in the swingarm. If you have some laying around shoot me a note.