Suzuki Quadracer HQ

Suzuki Quadracer HQ Discussion => Suzuki Quadracer HQ - General Discussion => Topic started by: Motoman991 on June 24, 2013, 09:35:38 am

Title: Re: LT250R custom pegs
Post by: Motoman991 on June 26, 2013, 01:29:47 pm

I did some stress analysis.  The stress is derived from Alum 7075-T6.  Bolt hole plate is 0.5", holes are 12mm.  Peg is 6.5" and overall length is 7".  I used a 600lbf spread evenly over the peg.  This is a 2" wide peg.  There is also a 0.5" radius on the bottom side of the peg above the bolt holes.

This is a very quick sketch.  This should give everyone an idea of where the high stress areas are.

Title: Re: LT250R custom pegs
Post by: PCS on June 26, 2013, 01:27:17 pm

nice set of pegs. not as funny as your mom but maybe just cutting out suzuki or lt250 would be nice too.

Title: Re: LT250R custom pegs
Post by: LT500Kid on June 26, 2013, 11:25:04 am

If cutting through affects the strength only cut in an 1/8 of an inch. That will still look sweet and you could paint inside the letters

Title: Re: LT250R custom pegs
Post by: Motoman991 on June 26, 2013, 07:40:15 am

If I get enough time today, I will make another drawing of a peg, I didn't save that one.  I will do some quick stress analysis on Solid Edge to see how much the cut through affects the strength.  I'm guessing it won't work.  Cutting them like that would increase the cost a bit too.

Title: Re: LT250R custom pegs
Post by: LT250RWV on June 25, 2013, 09:43:21 pm

I like them. That would be badass with lt250r or lt500r or 250 or 500  any way would be pretty cool.

Title: Re: LT250R custom pegs
Post by: JayTater on June 25, 2013, 06:03:18 pm

Yes! Your mom is perfect!

Title: Re: LT250R custom pegs
Post by: LT500Kid on June 25, 2013, 04:17:20 pm

thats what i meant.... it would be awesome to ride your mom all weekend!!!  +k2

Title: Re: LT250R custom pegs
Post by: Motoman991 on June 25, 2013, 03:42:45 pm

Quote from: WestTexasKing on June 25, 2013, 02:38:35 pm

Can you write "YOUR MOM" on the pegs instead?


That way I could ride YOUR MOM all weekend  ;D ;D

HAHAHAHA awesome idea

Title: Re: LT250R custom pegs
Post by: LT500Kid on June 25, 2013, 03:34:57 pm

Those would be sweet!

Title: Re: LT250R custom pegs
Post by: Kyle T on June 25, 2013, 02:49:19 pm

Or "step on"...

Title: Re: LT250R custom pegs
Post by: WestTexasKing on June 25, 2013, 02:38:35 pm

Quote from: Motoman991 on June 25, 2013, 01:20:59 pm

I made some billet pegs today on Solid Edge while at work.  7075-T6.  These are some gangsta ass pegs, I'd stand on them.

Can you write "YOUR MOM" on the pegs instead?


That way I could ride YOUR MOM all weekend  ;D ;D

Title: Re: LT250R custom pegs
Post by: Gillio on June 25, 2013, 01:39:37 pm

I like em! Let me know when they're for sale

Title: Re: LT250R custom pegs
Post by: Motoman991 on June 25, 2013, 01:20:59 pm

I made some billet pegs today on Solid Edge while at work.  7075-T6.  These are some gangsta ass pegs, I'd stand on them.

Title: Re: LT250R custom pegs
Post by: Dangerouspower on June 24, 2013, 03:57:41 pm

Thanks Stpltn !  D?

Title: Re: LT250R custom pegs
Post by: WestTexasKing on June 24, 2013, 12:09:11 pm

RIS makes pegs for the 500, I don't remember if they interchange on the 250.
http://www.motorcyclebilletbling.com/Suzuki-LT500R-Footpegs-RIS-LT500-FP.htm

Title: Re: LT250R custom pegs
Post by: LT500Kid on June 24, 2013, 10:43:40 am

Motorcycle billet bling or r.i.s. may make them

Title: Re: LT250R custom pegs
Post by: Stpltn250r on June 24, 2013, 10:33:23 am

Alkyzilla

Title: Re: LT250R custom pegs
Post by: Dangerouspower on June 24, 2013, 10:20:54 am

Which user is dale ? Sorry im terrible with names lol.

Title: Re: LT250R custom pegs
Post by: Q2W on June 24, 2013, 09:51:20 am

you might msg Dale.  He mods the fat roll design footpegs to fit the 500.  He may know which bike is a close swap and the mods you need to do to get it to fit correctly.

Title: LT250R custom pegs
Post by: Motoman991 on June 24, 2013, 09:35:38 am

Does anyone here make pegs for the 250?  I want some that a little wider and look better.  I know a Banshee guy that already said he can make some, but I want to know if there is anyone that has the template or has some already fabricated.