Suzuki Quadracer HQ

LT500R Quadracer => LT500R - Body / Chassis / Suspension => Topic started by: ShankJr on June 11, 2013, 06:40:26 am

Title: Re: brake lever
Post by: JayTater on June 11, 2013, 03:46:58 pm

The Mojave calipers are a direct swap on the 250 also. They're a bit better than the LT calipers.

Title: Re: brake lever
Post by: LT250RWV on June 11, 2013, 02:05:29 pm

I have a Kawasaki Mojave master brake cylinder on mine.work with no problems.I just used the banjo that was with the Mojave master cylinder.

Title: Re: brake lever
Post by: JayTater on June 11, 2013, 02:01:11 pm

I changed out to the RM250 front master, stops way better than stock.

Title: Re: brake lever
Post by: ShankJr on June 11, 2013, 12:16:34 pm

I think im gonna do the z400 master cylinder.  i thought i could just find a lever that would work with the zilla master cylinder

Title: Re: brake lever
Post by: LT500Kid on June 11, 2013, 12:02:42 pm

Z400 upgrade works awesome! 10 x better than Suzuki stock. Simple mod and worth every penny. Just gotta change banjo bolt. You will be able to do stoppies !!  +k2

Title: Re: brake lever
Post by: PCS on June 11, 2013, 11:50:41 am

honda trx and suzuki ltr brake parts swap as well they are both nissin but like mitch said watch out for the bolt sizes. i just swapped a trx 450r front master to a lt250r and my yamaha tri z runs a suzuki ltr450 front master cylinder. some motorcycles that do not use radial master cylinders up front will also fit since many are for a 7/8" bar

Title: Re: brake lever
Post by: Mitch Keller on June 11, 2013, 08:13:33 am

Just be sure to get the right Banjo Bolt, not the same as the LT500, think the Z400 is a 10mm x 125 pitch, learned this the hard way

Title: Re: brake lever
Post by: ShankJr on June 11, 2013, 07:43:28 am

Thats what i was thinking. I wasnt sure if one would just bolt in or not

Title: Re: brake lever
Post by: Mitch Keller on June 11, 2013, 07:07:21 am

Alot of us just changed the front master to a Z400 and use the ASV levers.

Title: Re: brake lever
Post by: ShankJr on June 11, 2013, 07:06:52 am

Im looking at an ASV kit on ebay. The clutch lever comes with a new perch, the brake lever is the lever only

http://www.ebay.com/itm/SUZUKI-LTR-450-06-12-F3-ASV-BLACK-CLUTCH-AND-BRAKE-LEVERS-KIT-/281110312023?pt=Motors_ATV_Parts_Accessories&vxp=mtr&hash=item41737af457

Title: Re: brake lever
Post by: Buckeye513 on June 11, 2013, 06:49:13 am

The factory bars are 7/8" I'd assume any hydraulic brake lever with that size perch mount would work as long as the line is long enough to reach the front master cylinder.

Title: brake lever
Post by: ShankJr on June 11, 2013, 06:40:26 am

what brake lever fits the zilla?