Suzuki Quadracer HQ

LT500R Quadracer => LT500R - Engine => Topic started by: Under_Pressure on May 19, 2013, 02:30:03 am

Title: Re: Help identifying pipe
Post by: Dezsled on May 23, 2013, 10:17:15 am

You might try contacting Mitch here as he is making a DCS 5 pipe/silencer, check the vendor area under forum

Title: Re: Help identifying pipe
Post by: Under_Pressure on May 23, 2013, 09:48:48 am

Ya I'm sending it back. Contacted the buyer and he said hell refund me the money. Sucks that I have to pay for the return shipping... Well off to get a aaen now. Thanks for the help guys. I finally started the bike after the rebuild can't wait to get her on the dirt again.

Title: Re: Help identifying pipe
Post by: GrkGuy on May 23, 2013, 09:01:16 am

you better send it back and get your money.

Title: Re: Help identifying pipe
Post by: Q2W on May 23, 2013, 08:20:23 am

not a zilla pipe. you can see where the springs attach on the header.  No way that would ever fit on a 500. 

Also, 500's dont have anywhere to mount towards the last bend.   That mounting tab would be useless.

Title: Re: Help identifying pipe
Post by: Chuckie25 on May 23, 2013, 04:18:39 am

CR500 lefty pipe? I know some of the big CR pipes are bent like that but all though mount on the right side of the bike.,,,,,

If you wanna get rid of it don't scrap it,,, Im starting to collect pipes

Title: Re: Help identifying pipe
Post by: Gillio on May 22, 2013, 08:32:52 pm

I was thinking and older RM pipe

Title: Re: Help identifying pipe
Post by: JayTater on May 22, 2013, 08:27:22 pm

Almost looks too small to be of much use for a zilla anyways. Looks to me like it may have been a better piece for 85-86 250. Dynoport maybe? There are a few real fart smellers out there that think the 250 is also a zilla.

Title: Re: Help identifying pipe
Post by: Under_Pressure on May 22, 2013, 07:20:15 pm

I think it's missing the header part as well but the person I bought it from he got it like that and was told it was for a quadzilla...

Title: Re: Help identifying pipe
Post by: Chuckie25 on May 22, 2013, 06:20:51 pm

Definitely missing the header piece. Almost looks like a left side mount TRX pipe,,,,,,

Title: Re: Help identifying pipe
Post by: Dezsled on May 22, 2013, 06:13:05 pm

Is there another part for it? Looks like its missing the header portion.

Title: Re: Help identifying pipe
Post by: Under_Pressure on May 22, 2013, 06:06:21 pm

Well it does not fit or it's missing a part. Here's the pics incase u know who makes it to he the missing part.

(http://i42.photobucket.com/albums/e312/franky69er2/photo4_zps3775f6cb.jpg)

(http://i42.photobucket.com/albums/e312/franky69er2/photo3_zpsad4c10a8.jpg)

(http://i42.photobucket.com/albums/e312/franky69er2/photo2_zps0d3068c3.jpg)


(http://i42.photobucket.com/albums/e312/franky69er2/photo1_zpsb25a887f.jpg)

Title: Re: Help identifying pipe
Post by: BadMoonRacing500 on May 19, 2013, 11:25:07 am

Old CT pipe?

Title: Re: Help identifying pipe
Post by: Dezsled on May 19, 2013, 09:16:31 am

The upper pipe mount leads me to believe it may not fit a Zilla, as there are no frame mounts in that area.

Title: Re: Help identifying pipe
Post by: Under_Pressure on May 19, 2013, 08:17:10 am

I contacted the seller to see if he can take some more pics to help out finding who made this pipe. I was looking at the trinity pipes but they have a different mount so its not it.

Title: Re: Help identifying pipe
Post by: Chuckie25 on May 19, 2013, 08:08:54 am

That looks like the pipe Dez or someone else is running. I've seen that exact bend an all before but I can't remember the name of the pipe

It almost looks like a Trinity but the trinity pipes don't have such a severe middle bend (right before the convergent cones)

Title: Re: Help identifying pipe
Post by: Under_Pressure on May 19, 2013, 05:12:38 am

He posted it came off a 87 lt500. It's the only picture he had. I can post more once I get it.

Posted another pic he had dont know if that helps. It's on the first post

Title: Re: Help identifying pipe
Post by: RustBelt on May 19, 2013, 05:04:53 am

I don't think that is going to fit an LT. Can you put up a few pics from other angles?

Title: Help identifying pipe
Post by: Under_Pressure on May 19, 2013, 02:30:03 am

Just bought this pipe on ebay but don't know who makes it. Any ideas? PO sai it has no markings on it.

(http://i42.photobucket.com/albums/e312/franky69er2/photo_zps735cf72a.jpg)

(http://i42.photobucket.com/albums/e312/franky69er2/photo_zpsacf123dd.jpg)