Suzuki Quadracer HQ
Suzuki Conversions (Hybrids) => Hybrids / Conversion - Engine => Topic started by: Golden250r on May 02, 2013, 08:17:52 pm
-
If you're going with an off the wall single, why not go with a Maico 620 instead?
-
Anything come of this Josh?
-
i think the main thing you need to worry about is, carb location with filter and sprockets lining up. oh and the pipe
is the axle bolt same size also
-
good luck on the swap!
-
if you have the motor just put it next to the lt motor and look at them side by side, should give you and idea about the mounting the ktm motor inside the lt frame.
=) i found a bike for 800 obo so wondering if it was feasible
-
if you have the motor just put it next to the lt motor and look at them side by side, should give you and idea about the mounting the ktm motor inside the lt frame.
-
THAT would be an excellent build!!!!!! I've been wanting to do a Husky WR brid, just haven't had the cash to get thecomponents needed to make it happen. DO IT!!!
-
It should be very similar to a hybrid 500 mod.
-
is it possible to fit a ktm 360 in the lt 85/ 86 frame? will no major crazy mod i don't care about exhaust work or small welds to using different engine mount plates