Suzuki Quadracer HQ

Suzuki Quadracer HQ Discussion => Suzuki Quadracer HQ - Suggestions => Topic started by: Dirtzilla on April 30, 2013, 11:06:58 pm

Title: Re: gearing calculator
Post by: Nekrofilliak on May 01, 2013, 06:47:18 am

http://www.apexgarage.com/tech/gear_ratios.shtml (http://www.apexgarage.com/tech/gear_ratios.shtml)

gear ratio must be calculated in decimal

gear ratio is calculated for a lt250r 87 first gear  primary reduction 2.681 x first gear ratio 2.384 = 6.392 this is the first gear ratio, you must calculate each gear ratio using the service manual spec.

final drive  is your chain sprocket ratio in decimal ex: 42/13 = 3.23

Title: Gearing Calculator
Post by: Dirtzilla on April 30, 2013, 11:06:58 pm

Mods, it would be good if we could have a gearing calculator on here like some of the other sites have.
So if your planning to change your  tire size or gearing, you could have a general idea of what to expect.

thanks