Suzuki Quadracer HQ
Suzuki Quadracer HQ Discussion => Suzuki Quadracer HQ - General Discussion => Topic started by: Mitch Keller on April 30, 2013, 04:27:01 pm
-
I don't think Detroit was built in a day either.
I hear it's not a fun place to be.
I've been there. Almost all of Detroit is a chit hole. That's what happens when liberals run a city.
-
As I like to say, Rome wasn't built in a day. Good things take time.
I don't think Detroit was built in a day either.
I hear it's not a fun place to be.
-
why wouldn't they fit a lt250? there 8X1.25 thread. same thread as a zilla head studs. same as a 250r, triz, tecate i could go on. lt250r has acouple m6 studs for the cylinder.
That's probably what I was thinking. Either that or my zilla has bigger head studs?
need to get that lt250r running el diablo my tri z is getting ready to play with another baby zilla! -->
It's in good hands right now. ;)
I know which hands it is in for some R and D!! Yes it is in good hands.
As I like to say, Rome wasn't built in a day. Good things take time. +k2
-
why would't they fit a lt250? there 8X1.25 thread. same thread as a zilla head studs. same as a 250r, triz, tecate i could go on. lt250r has acouple m6 studs for the cylinder.
-
need to get that lt250r running el diablo my tri z is getting ready to play with another baby zilla! -->
It's in good hands right now. ;)
I know which hands it is in for some R and D!! Yes it is in good hands.
-
Mitch pencil me in for a 7 stud set!
-
cant wait to see it back in action, i curious about the top end that was "donated" by our good friend chris
-
need to get that lt250r running el diablo my tri z is getting ready to play with another baby zilla! -->
It's in good hands right now. ;)
-
need to get that lt250r running el diablo my tri z is getting ready to play with another baby zilla! -->
-
Mitch, i'm not too sure on them fitting the 250. I think my 250 had smaller diameter studs if I can remember correctly. But I might be down for a 6 stud set pretty soon. +k2
Figured they were like the Honda Head Studs 8mm
-
Mitch, i'm not too sure on them fitting the 250. I think my 250 had smaller diameter studs if I can remember correctly. But I might be down for a 6 stud set pretty soon. +k2
-
Doing some changes, having to have custom copper washers being made in so doing the math on the 6 Stud Kit $23.95 (6 Plated Nuts and 6 Washers) and the 7 Stud Kit $27.95 (7 Plated Nuts and 7 Copper Washers)"SHIPPED" USA 48 States, them other 2 states e mail for a quote.
SHIPPED PRIORITY MAIL -average of 2 to 3 days for delivery .
Washers are .040" thick x 16mm OD x 8.4mm ID #110 Alloy Half Hard
Acorn Nuts are Plated & Flanged, 16.75mm Flanged Base -Smooth Bottom X 16.50mm tall, Head Size is 12mm (Wrench Size) 15.90mm deep.
-
So about $18 for a 7 stud kit then + the shipping?
-
Is around $15 gonna include nuts and copper washers?
YES for the 6 stud Kit. Also confirming if these will also work on the LT250s
-
Is around $15 gonna include nuts and copper washers?
-
Look at that sloppy sealant job all over the cylinder!
Gross, man.
Tudors likes to use lots of his sealant........... Good thing Im O ring this dome
-
Look at that sloppy sealant job all over the cylinder!
Gross, man.
-
No you can use these with any head.... Good stuff 12 mm and not 13 mm
-
So these are only usable with a coolhead? The acorn nuts and washers I mean.
-
How about adding some Voodoo fliptop kits Mitch? D?
-
I like to see the sqhq store continue to expand its product line. +k2
-
I like those.... so now you don't need to ultra grey the studs?
-
Nice blingage Mitch
-
These Kits will be for the 8mm Stud kit, most of us are running a Cool Dome that requires the 10mm base/8mm top (these will be in the store sometime soon)
Just waiting on the copper washers to arrive, these Acorn Nuts have the smooth base, flanged, and taller, and plated with the most important factor with the 12mm heads. If you ever used the 13mm Acorn Nuts they are a PIA to tighten.
The 6 stud and a 7 stud kits will be around $15.00 with the 7 stud kit slightly higher plus shipping (Flat Rate $5.95).
The Cool Domes O ring Kits will be out soon they will include the upper dome o rings the dome O ring and the outer dome ring.
Like to hear you thoughts
(http://i192.photobucket.com/albums/z183/erbe03/100_1189_zps8cd5af4e.jpg) (http://s192.photobucket.com/user/erbe03/media/100_1189_zps8cd5af4e.jpg.html)