Suzuki Quadracer HQ

Classifieds / E Bay / Craigslist => Items Wanted => Topic started by: Villani77 on April 28, 2013, 05:43:04 am

Title: Re: Need nerf bars and a pipe
Post by: All American on October 07, 2013, 09:40:40 pm

I've got some steel dg pipes I believe. I could sell them cheap. If you are interested message me.

Title: Re: Need nerf bars and a pipe
Post by: ThePowester on August 02, 2013, 07:42:14 pm

I have a Paul Turner its a little rough it needs the motor side expansion chamber welded back on. When I got it had the flange welded on so of course it was gonna.break and it did but I have a pipe that could be cut up to fix that if.you know a good welder. I dont have a fat boy to go with it but I do have what I believe is a FMF that was professionally cut and fitted to work with the Paul Turner, I ran.that set up for a good while and it was great.

Title: Re: Need nerf bars and a pipe
Post by: Quadracer87Man on August 01, 2013, 09:58:06 pm

I have a set of graydons.. make an offer

Title: Re: Need nerf bars and a pipe
Post by: Villani77 on April 28, 2013, 04:09:23 pm

Nope not yet

Title: Re: Need nerf bars and a pipe
Post by: RustBelt on April 28, 2013, 03:45:19 pm

Did you get nerfs?

Title: Re: Need nerf bars and a pipe
Post by: RustBelt on April 28, 2013, 03:43:38 pm

They also say the Fat Boy silencer is to restrictive and when you start to increase power on the motor (porting and so on) it may cause higher temps then you would want in you motor.

Title: Re: Need nerf bars and a pipe
Post by: LT250RWV on April 28, 2013, 09:20:19 am

Their a paul turner pipe on ebay right now it has fmf silencer on it. I would get it and buy a fat boy silencer  for it. They say the paul turner pipe have to have the fat boy silencer to run correct.

Title: Re: Need nerf bars and a pipe
Post by: Nydamedash on April 28, 2013, 07:45:35 am

Damiendeutscher@gmail.com

Title: Re: Need nerf bars and a pipe
Post by: Nydamedash on April 28, 2013, 07:44:46 am

I got two sets of nerf bars email me and ill send you photos

Title: Need nerf bars and a pipe
Post by: Villani77 on April 28, 2013, 05:43:04 am

I just recently acquired a completely stock lt250r. I am looking for a LRD or paul turner pipe and silencer and a nice set of nerf bars. Also looking for a set of V force reeds and cage.