Suzuki Quadracer HQ
LT250R Quadracer => LT250R - General Discussion => Topic started by: LT250RWV on April 20, 2013, 11:00:18 am
-
Are you not paying attention to anything that has been posted in the last 2 days???
Blah blah blah I suck eggs and drink ram **** blah blah blah
http://www.suzukiquadracerhq.com/lt250/problem-with-vibration-in-the-motor-!/msg16031/#msg16031 (http://www.suzukiquadracerhq.com/lt250/problem-with-vibration-in-the-motor-!/msg16031/#msg16031)
(http://i0.kym-cdn.com/photos/images/newsfeed/000/154/912/berneydidnotread.gif?1318992465)
I was too busy watching Weekend at Bernie's...
-
Thats fines.. Im just getting really frustated at the moment nothing seem to ever go right. Just bad luck and cutting corners so i can get running faster. It just time to let it sit for awhile till everything is back to par or new. So it will be fast and reliable. Just suck to redo a bottom end 2 months ago and never to think of the inserts to be bad or going bad.
-
What are you talking about that was my posted and couldnt get any answer on it so i made this about the price of the inserts.So that is why i asked.Isnt this a forum to get answers.
That wasn't directed at you bud 0>me It was for Clifford the big red dog =WTK --> I think Jerry quoted around $300 or so for the plastic inserts he has been using for 20+ years.
-
h
-
You might check to see if it's the bearing that's the problem before you go with a case insert.
It could be that the case is fine and the bearing isn't, but it's more than likely the case.
Either way, you'll need new bearings, so order the bearings and check before you send it off to have an insert put in.
Alternatively, find yourself a cheap set of cases for a 250...that might actually be cheaper than getting case inserts.
Are you not paying attention to anything that has been posted in the last 2 days??? Or have you been huffing pesticide again?? --> xoxoxoxo
http://www.suzukiquadracerhq.com/lt250/problem-with-vibration-in-the-motor-!/msg16031/#msg16031
-
Ive checked with 2 different set of bearings. I pull my spare 87 motor apart this evening and it has a bad insert on the clutch side to. Im going to send to my 91 cases to get fixed. I dont want to take a chance of buying a set used and having the same problem. Buying used stuff isnt working out for me so well here lately.I think Jerry said 130 to 160$ per side after i checked my answer machine. Thanks for the response guys.
-
You might check to see if it's the bearing that's the problem before you go with a case insert.
It could be that the case is fine and the bearing isn't, but it's more than likely the case.
Either way, you'll need new bearings, so order the bearings and check before you send it off to have an insert put in.
Alternatively, find yourself a cheap set of cases for a 250...that might actually be cheaper than getting case inserts.
-
Buy a set of good used ones
Or Pay 280-350 to get it done.
I never seen this on a Lt250 , All I ever Seen was Lt500 that did this. But I Don't play with lt250's
-
Bumb!! Please <1>
-
Mine are bad in my 250.I took it apart last night and the bearing hold to the crank but doesnt stay in the insert. My other case are the same way.How much does this cost to fix.Thanks any help would be great.Brian