Suzuki Quadracer HQ

LT250R Quadracer => LT250R - Body / Chassis / Suspension => Topic started by: Adastraxjro on April 09, 2013, 07:24:08 pm

Title: Re: 87 motor on 89 frame?
Post by: RustBelt on April 10, 2013, 03:28:37 pm

87 to 90 are all identical except the 1st half of 87 used 24 spline hubs on the rear and the 87 intake is larger with 5 bolt pattern 88 to 92 intake is smaller 6 bolt pattern. The 91 92 have a different swing arm set up, rear shock and air box.

Title: Re: 87 motor on 89 frame?
Post by: Adastraxjro on April 10, 2013, 01:29:42 pm

Actually ended up getting an entire 1990 lt250r for 400 needs piston and rings but will is a 1990 frame also the same as an 87

Title: Re: 87 motor on 89 frame?
Post by: BadMoonRacing500 on April 09, 2013, 08:00:33 pm

87-92 have the same axle carrier.

Title: Re: 87 motor on 89 frame?
Post by: Adastraxjro on April 09, 2013, 07:50:17 pm

thank you sir! nonw I need to find an 87 bearing carrier! any ideas?

Title: Re: 87 motor on 89 frame?
Post by: FX4Pitrone on April 09, 2013, 07:42:22 pm

Yes it will!

Title: 87 motor on 89 frame?
Post by: Adastraxjro on April 09, 2013, 07:24:08 pm

well more like entire 87 on an 89 frame will everything mount up ok?