Suzuki Quadracer HQ
LT250R Quadracer => LT250R - General Discussion => Topic started by: Golden250r on March 14, 2013, 03:01:25 pm
-
the alum plate is just to make sure it is gonna work -->.. getting a steel plate cut at my bud fab shop.. just wanted to do some mocking up as you notice the sharpy marker ;D thanks though i am glad that the other side you just drill about 1/8 inch over and your good ;D i will have pix when the steel plate gets done .. i am still a long way from running this thing
-
That don't look to safe LOL, make sure you mount them REAL good (Steel plates not aluminum) , Guy I know Blew a "left nut" when his foot peg broke off..
-
one side is done have the pix =) vary ez to get done
-
Pics of the fab job when finished lol
-
so the raptor 700 nerf bars bit pretty well... I will need a 1 inch plate to to bolt it up nicely and the left side just need to drilled about about 1/8 inch to bolt up
-
How's the kick starter arc?
Does it clear the nerfs?
it seems like it gonna miss it i will take pix tomor when i fab it up
-
How's the kick starter arc?
Does it clear the nerfs?
-
ya if i gind the nub's off my current pegs it fits right over it looks bad a (pg) (pg) cant wait for it to be all on will post pix of what i had to grind off to fit so everyone can have a beast like heal guard pro nerf bars
-
Can't beat the price +k2
-
scored a sweet set of nerf bars for a 700 raptor for 20$ gonna fab them up for the LT250
-
grabing some raptor 700 full nerf bars for the lt tomrrow i will fab them up and post pix
-
Awesome! keep us updated!
thanks man a ton of sweat and now tears when i broke the case when into this beast i cant wait to ride it again
-
Awesome! keep us updated!
-
getting money on the 25th for the quad excited just grabbed some cases for 58.00 both left and right with barrings in them then only 275$ more in parts and i should be on track
-
painted a arms and rest of it just a bit together =) looking good just wish i didnt brake the motor
-
fully repainted will be putting it all together - motor and swing arm =) will have pixx
-
That's a shame, you would love it running RM power.
tax time i am want to work on getting a ktm 360/380 jammed in there =)
-
I would watch for bad crank bearing inserts in used cases. Just something to watch for.
-
Depending on the damage, you may be able to get your broken case half welded up for cheaper than the price of a replacement case half.
a peace behind the swing arm hole **** and it put a hole into the inside of the case also pretty much F'ed it bad like a 2 inch peace is snaped and a finger size hole into the inside of the case so i found a few for 100$ or so .. not too bad should need about 350 to fishes the project up
-
Depending on the damage, you may be able to get your broken case half welded up for cheaper than the price of a replacement case half.
-
Treat that special gal well man...
-
That's a shame, you would love it running RM power.
-
well me and the wifey just sat down and decided i should just rebuild and get new cases and rebuild the bottom end barrings when i am at it =) so i am getting a bonus check on the 25 so let get parts a shipping
-
I hate when my luck runs like that. Good luck on your build
might got with a rm250 engine .. my wife told me she would help me out money wize
-
I hate when my luck runs like that. Good luck on your build
-
well crap new today .. when i was taking the bottom end out to paint and my milk crate broke and the motor fell and broke the right case ... selling it for 300$ obo
-
exhaust is fully repainted finally"pix tomrro"... engine gets the rest of it's part this week then semi put together of the quad beings
-
The long bolt the goes threw the swingarm and the motor.
yeppers been looking for one under 50$ for a while do u have one?
-
The long bolt the goes threw the swingarm and the motor.
-
it about 7 months in the making now almost done home stretch cant wait to ride this summer about 150$$ more and i will be on my way i am just waiting for a swingarm weld brakes and the hard to find swingarm bolt
-
looking good - great job so far bringing back a LT to life!!
-
it had a light trail port "confirmed by my old mx mech" so i am guessing it was jeted for that it ran ok befor i took it apart.. just making sure the reeds wont affect it much
-
Did you change anything else (port, pipe, carb..) If not then your jetting should be close if not the same as before the rebuild.
-
just got my reeds and gasket kit =) soon the motor will be alive =)... will i need to rejet for reeds?
-
decided to paint my clutch side cover black along with the engien black polished flywheel side cover and head ... it looks nuts i will do a mock up within a few day got some reeds "bosyon" for 20$ brand new in the box with headgasket kit only need a swing arm bolt =(
-
nice mock up of the plastics on the frame looking good =)
-
ya man i cant wait to have this thing together ... i am sooo pumped
-
looking good,
-
I hear ya just excited to ride this thing already haven't been riding in a year now.. so i work on it 2-4 hrs a day
-
had the quad for 6 months now and it isnt done yet
Some guys take years so don't sweat it.
-
one a-arm is primed and ready for black glad to see the project moving in the right direction have had the quad for 6 months now and it isnt done yet
-
got the plastics all done arms are sanded getting paint done this week should be looking good and frame together with the week
-
frame is done love the blue a arms are sanded and ready for paint "black" sending out the swing arm next week for welding. head gasket and reeds in the mail for the motor so with in a week or two should be running .. will get some pix up soon
-
just got one coat of blue on the frame = looking good
-
When i got mine i had to replace every bearing in the frame and wheels, They were all shot!
-
it had many many flaws lol **** swing arm bad front end barring bad oil seals needed rings ... i will post more pic tomrro should be running within the month
-
nice find for 250$ Looks good
-
primered up =)
-
bought this project for 250$ i cleaned the plastic and polished the side covers and got the frame primed today