Suzuki Quadracer HQ
LT250R Quadracer => LT250R - Engine => Topic started by: SuzukiRacer on March 11, 2013, 02:03:39 pm
-
You don't know where neutral is?
It's under there ------>
-
its between 1st and 2nd. 8)
Your just askin for it mister............................... [|]
-
Well you could have a bent shifter or a fork is worn out. spring on the neutral stop is off inside the case. shifting drum knuckles could be out of specs clutch worn out . Try tighten your clutch cable up and see if it will go first.
-
I think a worn out clutch basket, with grooves in it,will make it hard to find neutral as well.
-
its between 1st and 2nd. 8)
-
There are a few things it could be, i've had a bent shifter shaft make it really hard to find neutral.
-
Who knows. I guess when I have to bore out the head ill check out the transmission.
-
I would like to know if there is a reason for this also. Seems I can never find it unless I don't want to an peg it out. Maybe wore out shift forks I don't know
-
I have a 87 250r and for some reason I can never get it into neutral when the motor is running.I usually have to shut it off to find it. And its always down to first when I stop but if I try to go to neutral the shifter won't go up at all. What's the problem here?