Suzuki Quadracer HQ
LT500R Quadracer => LT500 - General Discussion => Topic started by: Dezsled on March 09, 2013, 12:00:22 pm
-
thanks guys i is geating new white plastics this summer i crashed it had last summer and broke the right rear fender off
-
I run an earthworks lithium battery & all lights are LED!!! I rode the bike for a week & never had to charge the battery!! The battery has a special fuse in it to allow you to charge it with a regular automati c charger!!! I run the headlight with a led lighted toggle switch, led whip & led tail light are on all the time until the quick disconnect is unhooked!! No issues with the batter holding its charge!! I payed $150 for the battery, $5 for the switch, $20 for the tail light, $97 for the led light bar is a spot beam 12 diode light!!!! Very cheap & low maintenance!! If the battery needs to charged it can be during the day!!!!
-
my 89
I totally dig White and Blue Zilla's. It should have been a factory offering...........nice ride Hemi.
-
Ha!! The pink is just for a joke!! The light bar is off ebay & im just running an overlay light harness for the lights & lithium battery on this zilla & my Pure Irish Hell zilla!! Didnt want to mess with the oem harness!!!
Glad your not using the pink. It has it's uses(tricking men into thinking marriage is the thing to do) but not on a Zilla.
Do you mean the lights run strictly on battery? How much life do you get out of it.
my 89
What can be said, your quads always lock sharp.
-
Ha!! The pink is just for a joke!! The light bar is off ebay & im just running an overlay light harness for the lights & lithium battery on this zilla & my Pure Irish Hell zilla!! Didnt want to mess with the oem harness!!!
-
my 89
-
Here is my buddys zilla that I restored for him!!!! I put hot pink grips & a go girl can over his rear shock resivor!!
Real nice. Can't figure out why hot pink but the rest is real clean.
-
Sean what kind of LED light bar is that and does your friend run a battery and the dc conversion wiring to run it?
-
Here is my buddys zilla that I restored for him!!!! I put hot pink grips & a go girl can over his rear shock resivor!!
-
Now I have a clamp and hose where the two meet. I had rtv between them at the time the pics were taken
-
They are not welded together It is a Q pipe and silencer. Matt from sheared actually made the pipe and he made me a turned down end to trick the dnr at silver lk. they see the end and assume it has a spark arrestor. Its worked so far. its black in the pic cause the chrome peeled off the first one and he sent that till he could chrome another for me.
-
Lt500kid is your pipe and silencer welded together? I don't see a coupler. And that looks like a q pipe but is that a q silencer too?
-
It's an slc +4 ladder style uses a round Lonestar carrier. Lance does nice work I have one on my hybrid too. His weld are perfect and he polishes everything before caroming. Real happy with his work.
-
LT500kid, nice quad. Can you tell us about that swinger?
-
my zilla
-
Regular billet terrycable thumb throttle with Packard 48 lectron throttle cable
-
Looks like a bionic thumb throttle for that super sized carb !
-
Stpltn250r what kind of dual gasser throttle is that? Do you like it an have you had any issues with it? Gonna be buying one don't know if I should get the moose one or the terry cable one.
-
Updated picture.
1988 LT540
Aggressive Dune port
Q 2.0
Iceracer Cool head
48 Alky Lectron
1-3 WCR w/ Pro Mod pkg
+8 OEM swingarm
10 paddle Extreme
Marvin Shaw Company F/R
Metal Tech +3/-1 w/ banshee spindles
Rouge airborne delete w/ 9" K&N
500Fanatic intake (coming soon)
-
Rider414 you have one nice oem clean look. Your bike is awesome.
Thank you - I appreciate that.
-
As it sits now
-
Pure Irish Hell
-
When I got it
-
(http://i435.photobucket.com/albums/qq76/elephantrider414/IMAG0216_zps90197b38.jpg)
(http://i435.photobucket.com/albums/qq76/elephantrider414/IMAG0215_zps718a6114.jpg)
It started from a heap of cobbled hillbilly crap that I paid way too much for!! Oh well atleast I have a Zilla.........:)
Rider414 you have one nice oem clean look. Your bike is awesome.
-
Schawing!!!!!!!! Nice set Beerside!!!
-
Those remind me of the twins....super clean OEM
-
Those are amazingly clean machines beerside!
-
twins!!! nice beerside!!
-
I just picked up another low hour '90 LT 500R. Here's both of them...
(http://i482.photobucket.com/albums/rr186/beerside/IMG_3272_zps585000e1.jpg)
(http://i482.photobucket.com/albums/rr186/beerside/IMG_3262_zps8ca4f183.jpg)
(http://i482.photobucket.com/albums/rr186/beerside/IMG_3250_zpsdc4e603c.jpg)
(http://i482.photobucket.com/albums/rr186/beerside/IMG_5445_zps8bb1da46.jpg)
-
Love your bike Rider.... looks so clean... nice OEM look w/ nice modern touches!!! Well done!
-
(http://i435.photobucket.com/albums/qq76/elephantrider414/IMAG0216_zps90197b38.jpg)
(http://i435.photobucket.com/albums/qq76/elephantrider414/IMAG0215_zps718a6114.jpg)
It started from a heap of cobbled hillbilly crap that I paid way too much for!! Oh well atleast I have a Zilla.........:)
-
Here,s my 88.Been looking like this for some time.Finally getting around to making some progress.Engine should be done soon and ready to install.
-
Here's my Zilla when I got it and in its current state. Ill modify this when my build is done in about a month or so.
-
I always take an extra look at the suspension linkage on your Zilla.
Wish there was a no link like my roll lobo ll
-
Nice zilla. Man i would love to be able to ride a place like that. But it's a long way from New Jersey.
-
Here's the "zilla" I rode this weekend.... it was beautiful sand in Glamis!
-
Get them Pics in the Gallery Also, need quad of the week photos
-
As it sits for winter...
(http://i875.photobucket.com/albums/ab319/cunningham_821/2012-11-11172733.jpg)
gotta look around for a b4 pic
-
Yeah i figured i would wait for my exhaust to come in so i can see what i need to do with it. I knew something didn't look right. Thanks for looking out though. (Y)
-
here is my sons little Lt collection
thata what i srarted on also had them both
-
ken500r, your rear shock rezzie is on backwards and upside down. if you fix it it will fit better and the line will clear the exhaust.
-
Can't find any pics before i took it apart. This thing was a mess everything was bad.
-
A little bit more done today. I'm almost there. :)
-
here is my sons little Lt collection
-
wish i had a half desent zilla to show off. got mine from a guy who didn't have title or any paperwork and was sitting outside for years. tranny doesn't go into neutral but had stock tires and exhaust and i picked it up for $800. needs all new plastic and lots of work so i been saving up. everytime i get enough saved life seems to slap me or the wife does and just like that there goes my toy $$. nice bikes on this site though.
-
My 88 the day i got it 2 years ago. Engine dident run and pretty much everything worn out. And a pic were i am now, still alot of work left but i am getting there D?
-
It's cool to see others zillas out there. Mine started out pretty rough, lots of worn out parts, **** plastic, tired engine...
Before
(http://i83.photobucket.com/albums/j300/Dezsled/photo8.jpg)
After
(http://i83.photobucket.com/albums/j300/Dezsled/photo87-1.jpg)
Still engine work to go, another pipe showing up...
I should have bought the LT500 a long time ago, I've spent less than half on my Zilla than what I paid for the LTR-450. And it's way more entertaining to ride!