Suzuki Quadracer HQ

Suzuki Quadracer HQ Discussion => Suzuki Quadracer HQ - General Discussion => Topic started by: Mitch Keller on March 02, 2013, 07:56:02 pm

Title: Re: Checking Interest on Camber Slip On Spacers
Post by: Beerside on April 18, 2013, 12:05:20 am: I'm Still down! Let me know when these will be available _^_
Title: Re: Checking Interest on Camber Slip On Spacers
Post by: Buckeye513 on April 11, 2013, 01:57:16 pm: Sounds fantastic ill use stock bolts if they fit or get my own let me know when I can get a set should have my roller together in the next 2 to 3 weeks and would like to not have to take my ball joints back out to do this mod.
Title: Re: Checking Interest on Camber Slip On Spacers
Post by: Mitch Keller on April 11, 2013, 01:25:32 pm: Will post when I get my Bill, seems my fabricator is all flustered by the changes I made, we are looking at $40.00 per set shipped without bolts, looking into 35mm bolts today
Title: Re: Checking Interest on Camber Slip On Spacers
Post by: Buckeye513 on April 11, 2013, 01:15:18 pm: What's the price so I can solicit my financial backer?
Title: Re: Checking Interest on Camber Slip On Spacers
Post by: LT500Kid on April 11, 2013, 10:55:15 am: I'm still on too Mitch pm me your pay pal and ill pay ASAP. Thanks
Title: Re: Checking Interest on Camber Slip On Spacers
Post by: Mitch Keller on April 11, 2013, 08:23:32 am: Should be ready to sell By 04/15
Title: Re: Checking Interest on Camber Slip On Spacers
Post by: Mitch Keller on March 15, 2013, 12:52:02 pm: Thats great news, I still need conformation on the a arms measurements, can any one confirm?
Title: Re: Checking Interest on Camber Slip On Spacers
Post by: LT500Kid on March 15, 2013, 11:36:25 am: I'm in for a set!! Pm me and I'll pay pal you or send a check your way.
Title: Re: Checking Interest on Camber Slip On Spacers
Post by: Mitch Keller on March 15, 2013, 11:14:10 am: Im at a stand still, until I can get my Quad with stock A arms back , I need a dimension (See This Thread)
http://www.suzukiquadracerhq.com/chassis-suspension/help-need-a-measurment-asap/new/#new
Title: Re: Checking Interest on Camber Slip On Spacers
Post by: Rainman56 on March 15, 2013, 10:29:43 am: Any progress on the spacers?
Title: Re: Checking Interest on Camber Slip On Spacers
Post by: Mitch Keller on March 07, 2013, 10:57:44 am: First Article should be done next week, still working on the plated flange bolts.
Title: Re: Checking Interest on Camber Slip On Spacers
Post by: Johnny Rage on March 07, 2013, 10:48:37 am: Yeah I could use a set
Title: Re: Checking Interest on Camber Slip On Spacers
Post by: Cobrazilla on March 06, 2013, 10:18:07 pm: Count me in for a set.
Title: Re: Checking Interest on Camber Slip On Spacers
Post by: Beerside on March 05, 2013, 04:10:44 pm: Im "IN" and can send money when ready!! Please let me know, Great idea!!
Title: Re: Checking Interest on Camber Slip On Spacers
Post by: GrkGuy on March 05, 2013, 02:02:28 pm: i just want the spacer, i will get my own bolt.
why are you getting a new bolt, the oem one still has enough threads to hold one on.
Title: Re: Checking Interest on Camber Slip On Spacers
Post by: Bhatch21 on March 05, 2013, 12:02:38 pm: Ahh, I see. No go there because of the fine pitch.
Title: Re: Checking Interest on Camber Slip On Spacers
Post by: Mitch Keller on March 05, 2013, 12:00:16 pm: 14MM X 35 - 40MM LONG X 1.500PITCH
Title: Re: Checking Interest on Camber Slip On Spacers
Post by: Bhatch21 on March 05, 2013, 11:55:02 am: I don't know what size or length you need, but here's a M10x30 10.9 flange bolt from Fastenal that is zinc. They've got many others.

http://www.fastenal.com/web/products/detail.ex?sku=11115680
Title: Re: Checking Interest on Camber Slip On Spacers
Post by: Mitch Keller on March 05, 2013, 10:37:01 am: Should have them ready to ship next week, heck Im excited about this.
Title: Re: Checking Interest on Camber Slip On Spacers
Post by: Rider414 on March 05, 2013, 10:16:11 am: I am still in -
Title: Re: Checking Interest on Camber Slip On Spacers
Post by: Mitch Keller on March 05, 2013, 09:49:39 am: Might be easier to go with a Chromed 10.9 Allen Head
Title: Re: Checking Interest on Camber Slip On Spacers
Post by: Glamisrider on March 05, 2013, 09:16:13 am: Try Hillco,
This is my go to and I live around the corner.

They don't have a huge selection of plated but they do have all kinds of bolts.

www.hillcofasteners.com/

(The address on the website is wrong their located on western north of garden grove blvd)
Title: Re: Checking Interest on Camber Slip On Spacers
Post by: Mitch Keller on March 05, 2013, 07:51:12 am: Did , said nope
Title: Re: Checking Interest on Camber Slip On Spacers
Post by: Bhatch21 on March 05, 2013, 07:37:05 am: Try Fastenal. They can get the plated metric flange heads bolts. No washer needed.
Title: Re: Checking Interest on Camber Slip On Spacers
Post by: Hotbutta on March 04, 2013, 07:19:50 pm: in
Title: Re: Checking Interest on Camber Slip On Spacers
Post by: Mitch Keller on March 04, 2013, 04:14:56 pm: Prices are a bit higher than I thought due to the tooling in machine cost, but I am only having 25 sets made at this time.

I am also including 2 new grade 10.9 hex head Bolts that are 5mm longer w/washers (plated).

I am looking at $50.00 per set shipped.

The dang bolts are a pain in the azz to find plated, find them all day long cheap unplated.
Title: Re: Checking Interest on Camber Slip On Spacers
Post by: Rupton88 on March 03, 2013, 11:40:10 am: Mitch put me down on the list
Title: Re: Checking Interest on Camber Slip On Spacers
Post by: Kreidy818 on March 03, 2013, 07:53:48 am: thirty bucks in hand right now!!!!
Title: Re: Checking Interest on Camber Slip On Spacers
Post by: Zillicious on March 03, 2013, 06:03:54 am: I'm in here too
Title: Re: Checking Interest on Camber Slip On Spacers
Post by: Rainman56 on March 02, 2013, 11:36:23 pm: I,m in as well.
Title: Re: Checking Interest on Camber Slip On Spacers
Post by: Deebo on March 02, 2013, 10:45:18 pm: X1........
Title: Re: Checking Interest on Camber Slip On Spacers
Post by: FX4Pitrone on March 02, 2013, 09:42:52 pm: Yup, Mitch I'm in!! Will the stock bolt work?
Title: Re: Checking Interest on Camber Slip On Spacers
Post by: Heminutt on March 02, 2013, 09:37:52 pm: i would be in for a set
Title: Re: Checking Interest on Camber Slip On Spacers
Post by: LT250RWV on March 02, 2013, 08:55:04 pm: I would be in for some!!
Title: Re: Checking Interest on Camber Slip On Spacers
Post by: BadMoonRacing500 on March 02, 2013, 08:47:39 pm: Yes please.
Title: Re: Checking Interest on Camber Slip On Spacers
Post by: Gillio on March 02, 2013, 08:35:45 pm: Will they come with the longer bolts?
Title: Re: Checking Interest on Camber Slip On Spacers
Post by: Rider414 on March 02, 2013, 08:25:36 pm: I want to do this. I do not want to cut my OEM a-arms. Im in for some if you make them.
Title: Re: Checking Interest on Camber Slip On Spacers
Post by: Mitch Keller on March 02, 2013, 08:03:10 pm: Just seen a large interest in folks doing the camber mod, figured I would make it easy.
Title: Re: Checking Interest on Camber Slip On Spacers
Post by: Dezsled on March 02, 2013, 08:00:36 pm: Now you fab some of them up. After bought the new a arms -->
Title: Checking Interest on Camber Slip On Spacers
Post by: Mitch Keller on March 02, 2013, 07:56:02 pm: Just received some quotes on making some #7075 Aluminum Spacers for the lower OEM A Arm Camber Mode, these spacers will be notched at each end to match OEM ball joint and OEM a arm fit, simply unbolt your lower a arm and push the lower joint out and slip on the new camber spacer and tighten ....done.
looking at $30 bucks a set shipped