Suzuki Quadracer HQ

LT500R Quadracer => LT500R - Body / Chassis / Suspension => Topic started by: Duneatic70 on February 23, 2013, 12:37:06 pm

Title: Re: ZILLA'S REAR HUBS ARE LOOSE!!
Post by: Duneatic70 on February 23, 2013, 11:29:05 pm

Thank you for your help king!!!

Title: Re: ZILLA'S REAR HUBS ARE LOOSE!!
Post by: WestTexasKing on February 23, 2013, 08:44:21 pm

Just add a washer, no big deal.

Title: Re: ZILLA'S REAR HUBS ARE LOOSE!!
Post by: Duneatic70 on February 23, 2013, 08:14:15 pm

The castle nuts on both bikes are bottomed out against the axle!!!!! Im thinking the correct fix is to install a thicker washer to fix it but before I did I wanted to make sure this wasnt a normal thing with these zillas!! Mine is completly non origional & my buddys is a complete virgin one owner with absoutly very little hours on it!

Title: Re: ZILLA'S REAR HUBS ARE LOOSE!!
Post by: WestTexasKing on February 23, 2013, 02:15:35 pm

Are the splines loose, or is the castle nut bottomed out on the axle allowing the hub to move along the splines?

Title: ZILLA'S REAR HUBS ARE LOOSE!!
Post by: Duneatic70 on February 23, 2013, 12:37:06 pm

Can anybody help me??? My 89 zillas hubs are loose & the castle nut is torqued to specs!!! My buddys 89 zilla is the same way & completely stock & has never been touched!! Any suggestions on how to fix this??  Inspected hubs & axle & no signs of wear?? <1>