Suzuki Quadracer HQ

LT250R Quadracer => LT250R - Body / Chassis / Suspension => Topic started by: Qracer250alllday on February 13, 2013, 04:31:05 pm

Title: Re: swing arm question
Post by: BadMoonRacing500 on February 20, 2013, 01:49:15 pm

Quote from: 1989LT500Rzilla on February 20, 2013, 12:06:15 pm

Would a 500 swing arm fit on a 250 frame

Yes, but it's 1 or 2 inches shorter than the 250 swinger, so it would only be useful for flattrack/ ice, and still might be too short.

Title: Re: swing arm question
Post by: Qracer250alllday on February 20, 2013, 01:24:54 pm

I have no idea

Title: Re: swing arm question
Post by: 1989LT500Rzilla on February 20, 2013, 12:06:15 pm

Would a 500 swing arm fit on a 250 frame

Title: Re: swing arm question
Post by: Qracer250alllday on February 20, 2013, 10:06:14 am

Hey guys I have another question the reason I think I need a new swing arm is because where it bolts thru the motor one side of the round part where the bolt slides thru is broken would I be able to weld that back together and get some use out of it? I can post a pic if it'll help your response

Title: Re: swing arm question
Post by: Qracer250alllday on February 13, 2013, 07:28:37 pm

K thanks everyone

Title: Re: swing arm question
Post by: SBLT500R on February 13, 2013, 07:27:00 pm

91-92 frame is also different where the upper shock mounts and where the lower linkage mounts to the frame.

just look for a 87-90 swingarm.  theres plenty out there.   could even use a 85-86 swingar but there prone to cracking around the bearing carrier.

Title: Re: swing arm question
Post by: FX4Pitrone on February 13, 2013, 07:10:35 pm

Yes shock is different also... different rezzie line/mounting... and lower fork mounts on shock rather than eyelets....

Title: Re: swing arm question
Post by: Qracer250alllday on February 13, 2013, 06:27:23 pm

So is the shock different also?

Title: Re: swing arm question
Post by: Quadster on February 13, 2013, 06:16:13 pm

91-92 has the linkage under the swingarm.

Title: Re: swing arm question
Post by: Rainman56 on February 13, 2013, 06:02:25 pm

Don,t think the 91-92 use the link.Shock goes from the swinger to the frame with no dog bone or pivot.

Title: Re: swing arm question
Post by: Qracer250alllday on February 13, 2013, 05:35:15 pm

Ok is it possible to use the 91-92 what would you need the linkage off it too?

Title: Re: swing arm question
Post by: LT500Kid on February 13, 2013, 05:34:17 pm

Yes

Title: Re: swing arm question
Post by: Qracer250alllday on February 13, 2013, 05:28:28 pm

So 87-90 will work

Title: Re: swing arm question
Post by: LT500Kid on February 13, 2013, 05:27:19 pm

91-92 use a different swinger on the 250's they are no link.

Title: swing arm question
Post by: Qracer250alllday on February 13, 2013, 04:31:05 pm

My 87 needs a new swing arm are there any differences between the 87 - 92?