Suzuki Quadracer HQ

LT250R Quadracer => LT250R - Engine => Topic started by: Rainman56 on February 12, 2013, 03:27:25 pm

Title: Re: Difference between 87 lt250 and 88-92 250 crankshafts.
Post by: BadMoonRacing500 on February 14, 2013, 12:59:21 am

Quote from: LT250RWV on February 14, 2013, 12:51:56 am

The balance shaft in a 87  is a little different from 88 to 92,It take smaller hole oil seal which the 88to 92 has a big hole seal.The bearing are the same,just different oil seals.
The ome parts look up say same shaft all year 87 to 92,

This... They will interchange with the correct oil seal, same for zilla cranks I believe.

Title: Re: Difference between 87 lt250 and 88-92 250 crankshafts.
Post by: LT250RWV on February 14, 2013, 12:51:56 am

The balance shaft in a 87  is a little different from 88 to 92,It take smaller hole oil seal which the 88to 92 has a big hole seal.The bearing are the same,just different oil seals.
The ome parts look up say same shaft all year 87 to 92,

Title: Re: Difference between 87 lt250 and 88-92 250 crankshafts.
Post by: Rainman56 on February 12, 2013, 05:20:21 pm

So then would the counter balancer be a tad different on the 87,s as well?

Title: Re: Difference between 87 lt250 and 88-92 250 crankshafts.
Post by: Iceracer on February 12, 2013, 04:53:57 pm

Functionally nothing. The 87 crank is heavier than the later models with a little differnt balance ratio I would expect.

Title: Difference between 87 lt250 and 88-92 250 crankshafts.
Post by: Rainman56 on February 12, 2013, 03:27:25 pm

Was on hotrods site looking for a 500 crank and saw they still have them for 88-92 250,s but not the 87.Just curious what the difference is between the 2?