Suzuki Quadracer HQ
LT500R Quadracer => LT500R - Body / Chassis / Suspension => Topic started by: QuadDave on October 01, 2012, 09:10:56 am
-
thanks guys.
-
The G-Force hubs are good and extend up to 3" I think four around $110
If you want a cheaper option, the Suzuki LTR450 rear hubs will slide right on and gave you +.75" bot sides and you can order a set of 3/8ths axle spacers from durablue for a little extra. LTR hubs on ebay run around $40 and I'm not sure on the spacers.
-
Im looking to put beadlocks on the rear of my 87 500. is there a different hub I can install that will extend the axle a couple inches too? Having a hard time finding 5 bolt beadlocks.
If you want 5 bolt beadlock wheels, you may have to order the lock rings and have them welded to your existing wheels.
Or you can look for a set of G-Force wheel hubs for a Suzuki LTZ-400. Factory LTR-450 hubs will also work but they are not as offset as the G-Force pieces.
-
Im looking to put beadlocks on the rear of my 87 500. is there a different hub I can install that will extend the axle a couple inches too? Having a hard time finding 5 bolt beadlocks.
-
Double and triple check the size references on the bottom.
If you don't your pattern will be off, ask me how I know :)
-
(http://i192.photobucket.com/albums/z183/erbe03/Suzukiquadracerhq/HondaRearTemp4-110-page-001.jpg)
(http://i192.photobucket.com/albums/z183/erbe03/Suzukiquadracerhq/HondaFrontTemp4-144-page-001.jpg)
(http://i192.photobucket.com/albums/z183/erbe03/Suzukiquadracerhq/YammahaTemp4-115-page-001.jpg)
-
Link for front and rear bolt pattern templates.
http://www.recreationtires.com/bolt.html