Suzuki Quadracer HQ

LT250R Quadracer => LT250R - General Discussion => Topic started by: Quadracer250r on February 07, 2013, 05:59:04 am

Title: Re: What Is The Stock Carburator Size ?
Post by: Rainman56 on February 10, 2013, 07:21:14 pm

Here are some basic specs if you need them in the future.

http://www.suzukiquadracerhq.com/chassis-suspension-17/lt250-details-and-specs/

Title: Re: What Is The Stock Carburator Size ?
Post by: Quadracer250r on February 10, 2013, 10:42:15 am

i have a 90 im putting a 36mm flatside mikuni

Title: Re: What Is The Stock Carburator Size ?
Post by: SBLT500R on February 07, 2013, 04:42:56 pm

all lt250's came with a flat slide mikuni.  that might be a tecate carb

the 85-86 can't really go bigger than a 36mm.  the cases hit the carb.  could probably do it but be tight fit.  also wouldn't make sense as the carb bore would be larger than the intake.  need to open the intake up. 

Title: Re: What Is The Stock Carburator Size ?
Post by: Twinzilla on February 07, 2013, 01:15:41 pm

I have a 34mm round slide Mikuni....would that be a stock 87-92 250 carb?

Title: Re: what is the stock carburator size ?
Post by: Iceracer on February 07, 2013, 08:22:49 am

85-86 = 32mm
87-92 = 34mm
36 is same od as a 32-34, a 38 will fit with some persuasion.

Title: Re: what is the stock carburator size ?
Post by: GrkGuy on February 07, 2013, 07:44:56 am

put a 38mm on it, a stock zilla carb will work fine on a 250

Title: Re: what is the stock carburator size ?
Post by: Quadracer250r on February 07, 2013, 06:27:29 am

will a 36mm fit ?

Title: Re: what is the stock carburator size ?
Post by: LT500Kid on February 07, 2013, 06:01:26 am

34mm on 250's

Title: What Is The Stock Carburator Size ?
Post by: Quadracer250r on February 07, 2013, 05:59:04 am

36mm?