Suzuki Quadracer HQ
LT500R Quadracer => LT500R - Body / Chassis / Suspension => Topic started by: FX4Pitrone on January 27, 2013, 05:19:52 pm
-
Thanks guys!! Anyone know what the stock off set was on Zilla rear wheels? I don't have one here to look at....
-
nope it wont fit, 500 is larger
just like sblt said.
just flip the rims or turn hubs around, i have seen it where guys have had the hubs
on the out side of the wheel, guys drag racing.
-
Will a '87 up 250 carrier bolt into a 500 swingarm?...if so I believe you can use a 230 suzuki axle. Very narrow, but hey,.. I'm not up on all the 250 specs.....
-
if you have offset rims, why not just turn them around?
or put the hubs on backwards. have to bolt the wheels on first then put the hubs on. save you an inch or 2.
-
Get ahold of Pitsandcars he is a member here, he is running a metaltech swingarm with a Banshee carrier, and running a J and J aluminum axle , see the link
http://jjandaracing.com/contents/en-us/d18.html
-
Anyone ever try narrowing the rear end of a Zilla? Thinking the best ways are by offset, or taking material off hubs (Z400)??
Looking to try to take about an inch off total... what is stock Zilla rear end width and what is stock rear offset?
I know width is listed at 47.4", but is that at front or rear, or are they equal?