+-

Author Topic: Steering stem bearing  (Read 86 times)

Offline LTman

  • Trade Count: (0)
  • Weekend Warrior
  • ****
  • Posts: 154
  • Location: Wv
Steering stem bearing
« on: May 20, 2020, 09:38:29 am »
I've found a bearing that fits perfect to replace the steering stem bushing 
It's got a inter sleeve so it will fix your worn out stem
I got mine from eBay bearing number HK172630
It was easy install I pushed the bearing in from the bottom after pushing it in I cut the old bushing down to fit the top part of the hole then installed it
87 lt500r hybrid custom intake with 48 lectron, v2 reeds, scr dune port,4'' over swinger
87 lt250 mild porting, shear pipe,v3 reeds,4''swinger
91 lt250r stocker , fmf
83 RM500 build in progress
85 465rm hybrid dune port, v3 reeds,hand con pipe ,vm 46mm carb 4'' swinger ,in progresss

Share on Facebook Share on Twitter


Offline Andys92

  • Trade Count: (0)
  • Range Rover
  • *****
  • Posts: 389
  • Gender: Male
  • Location: roscoe NY
Re: Steering stem bearing
« Reply #1 on: May 20, 2020, 12:04:45 pm »
That's good to know thanks
Lonestar outlaw lrd ported ,custom dynoport exhaust etc
1992 hybrid,Bartlett trail port ,q pipe etc.
Lonestar outlaw 250 project

Offline Andys92

  • Trade Count: (0)
  • Range Rover
  • *****
  • Posts: 389
  • Gender: Male
  • Location: roscoe NY
Re: Steering stem bearing
« Reply #2 on: June 02, 2020, 04:16:31 am »
This work with 250and 500.Are the stems etc the same size?
Lonestar outlaw lrd ported ,custom dynoport exhaust etc
1992 hybrid,Bartlett trail port ,q pipe etc.
Lonestar outlaw 250 project

Offline 2StrokeBandit

  • Trade Count: (0)
  • Green Horn
  • ***
  • Posts: 63
  • Gender: Male
  • Location: Europe
Re: Steering stem bearing
« Reply #3 on: June 16, 2020, 01:36:38 am »
bought the bras one already but thx anyway ... good to know for the future !
88`GOAT.zilla ...

 

+- Suzuki Quadracer HQ Store Zone

http://www.suzukiquadracerhq.com/index.php?action=store