Author Topic: New Rescue: 1987 Quadracer LT500R!! (Read 3616 times)

Buckeye513 · « **Reply #25 on:** June 27, 2013, 03:05:25 pm »

So my guess was pretty dang close at $2300

Rider414 · « **Reply #26 on:** June 27, 2013, 07:32:29 pm »

Zilla's ain't cheap round' these parts.......

LT500Kid · « **Reply #27 on:** June 28, 2013, 05:06:03 am »

No kidding theres a hoopty on c.l. right now in michigan that he wants 4k for. Im doing a kitchen for a guy right now and he has a zilla in the garage its a roller with the motor out. New oem plastics on it. he said its been sitting for 5 years he has no time for it. Cross your fingers for me I'm going to try and work out a barter on his remod.

GrkGuy · « **Reply #28 on:** June 28, 2013, 06:08:56 am »

very nice find, so can we expect to see some of that great work you did on shirley on this new build,

keep us posted on this.

Rider414 · « **Reply #29 on:** June 28, 2013, 05:44:07 pm »

Mr. Greek

Nothing much planned, I want to ride a stocker on the trails to see what kind of a trail bike it is.

Stock....eewwwww

Chuckie25 · « **Reply #30 on:** June 28, 2013, 07:17:41 pm »

I want the rear bumper!!!!!!!!!!!!! Lol

Kyle T · « **Reply #31 on:** June 28, 2013, 08:15:14 pm »

I'm pretty sure it won't fit a BABY quad CJ.

GrkGuy · « **Reply #32 on:** June 29, 2013, 06:12:37 am »

good deal, but you will want more power or the quad will not get rode that much. lol
who wants to ride a slow quad beside Kyle. lmao

oh wait did you mean Michigan stock.

Rider414 · « **Reply #33 on:** June 29, 2013, 07:48:02 am »

This 87 is starting to scare me.

I had the rear tore down in 30 minutes. It would have been faster if I didn't have to deal with that stupid DG rear bumper. I don't think it's going back on. I was preparing for battle!! My the 87 took 3 days just to get a hub off.

Did the 87 Zilla come with a OEM o-ring chain? I believe the entire rear drivetrain was stock. Maybe original axle bearings? There were teeth marks in the axle nuts but maybe they just snugged them up? I don't know but the chain and brake side axle bearing were smoked!!

Need some parts now. Not alot as everything seems straight.

Chuckie25 · « **Reply #34 on:** June 29, 2013, 08:23:41 am »

If you don't want the bumper I know a good wall for it where it can hang out with some other cool things LOL

GrkGuy · « **Reply #35 on:** June 29, 2013, 12:09:51 pm »

well they come apart fast, we all know that.

Dezsled · « **Reply #36 on:** June 29, 2013, 09:12:12 pm »

Not wasting any time !

Kyle T · « **Reply #37 on:** June 30, 2013, 07:27:36 am »

I'm pretty sure the Zillas came with endless O-ring chains stock.

Nopick · « **Reply #38 on:** June 30, 2013, 07:55:24 am »

I know for a fact the 250 had an endless chain. I can't imagine the Zilla would have had a master link from the factory.

MD2smoker · « **Reply #39 on:** July 01, 2013, 10:35:29 am »

I just cut off the chain from my 87 yesterday, no master link.

Rider414 · « **Reply #40 on:** July 01, 2013, 05:55:05 pm »

The drivetrain rebuild went well.

My local motorsports shop (moto-man racing, also a great mail order place) has some rear axle bearings in stock along with a new o-ring chain. I picked up a liter of tranny oil too. The PO had given me a new set of rear brake pads and a new 13 tooth front sprocket. He had a 12 tooth front sprocket that was really worn and actually chewing up the lock washer for sprocket nut.

So far:
New Chain
New Axle Bearings and Seals
New Front Sprocket
New Rear Brake Pads
Re-used rear 42 Tooth Sprocket from the Shirley Build (almost new)
New UNI Foam Air Filter left over from the Shirley Build

Also installed the factory clutch lever/parking brake set-up salvaged from the Shirley build, and replaced the nasty sticking twist throttle with the thumb throttle from the PO. I pulled the FMF Silencer w/ SA apart as it looked like it was leaking oil. The packing was gone. So I repacked it with some insulation and sealed it back up. That silencer looks to be extremely restrictive!! That's ok for this quad as its not a drag racer. I put the turf tamers on that the PO gave me vs. the monster truck mudders that came on it (for sale lol).

Total cost so far $131.00

Went through the carb. Its the 87 TM38SS Mikuni with stock jetting (420 Main). It leaked gas so I cleaned the needle valve up and put it back together.

I need new grips and some bolts from Buckeye to get things buttoned up. I hope to get it out this weekend to do some playing around. Nothing real hard as I don't wanna blow it up and wreck the head/cylinder/crank from those shady factory thrust washers.

CRUSTY!!!

FMF Fatty = FAT POWER!!!

The New Kid packed in there and one lonely Yamaha

LT500Kid · « **Reply #41 on:** July 01, 2013, 06:17:06 pm »

Tell me about that jeep 414? Im in the market for one for up at my cabin

Dezsled · « **Reply #42 on:** July 01, 2013, 06:43:39 pm »

That's one full garage! Digging it!

Rider414 · « **Reply #43 on:** July 05, 2013, 07:10:49 pm »

I had the old/new 87 out today for my first time. She runs real good!! I was very pleasantly surprised with the power. Airbox lid and all! It comes on pretty early and pulls strong. Signs off way earlier than the Dr Q. V2 Pipe on Shirley. However its still a very fast quad with just a crappy pipe!! I think this Zilla will make a great little trail partner when I feel like burning oil.

It's alot easier to wheelie vs my other Zilla. Power is smoother and not as violent.

Rider414 · « **Reply #44 on:** July 05, 2013, 07:14:32 pm »

This is Shirley from last fall.

Buckeye513 · « **Reply #45 on:** July 05, 2013, 07:31:09 pm »

Nice man! Did those rear end bolts arrive ok?

Rider414 · « **Reply #46 on:** July 05, 2013, 07:34:01 pm »

Quote from: Buckeye513 on July 05, 2013, 07:31:09 pm

Nice man! Did those rear end bolts arrive ok?

They probably did sir (thank you) but for this trip I robbed my other Zilla.

GrkGuy · « **Reply #47 on:** July 06, 2013, 05:48:55 am »

damm that was fast, come down here i have 3 that are ready to be put back together,

Buckeye513 · « **Reply #48 on:** July 06, 2013, 05:57:55 am »

It looks like Shirly and the rescue 87 could use a camber spacer kit from Mitch.

Dezsled · « **Reply #49 on:** July 06, 2013, 10:33:18 am »

Restored already ? Man that was fast !

News:

Author Topic: New Rescue: 1987 Quadracer LT500R!! (Read 3616 times)

Suzuki Quadracer HQ Store Zone