+-

Author Topic: Lt250 1985 after market crank questions  (Read 655 times)

Offline Sl_Avery

  • Trade Count: (0)
  • Newbie
  • **
  • Posts: 1
Lt250 1985 after market crank questions
« on: February 02, 2017, 08:42:19 pm »
 New to the lt's. can anybody tell me if they make a hot rods crank for the 85 lt250 or what my best option would be?

Share on Facebook Share on Twitter


Offline Iceracer

  • CEO BRP
  • Trade Count: (0)
  • Trail Blazer
  • ******
  • Posts: 772
  • BRaP Small block 302, Released and Running
Re: Lt250 1985 after market crank questions
« Reply #1 on: March 08, 2017, 06:32:26 am »
OEM parts( pin, rod, bearing and washers) to rebuild your crank are available Id go that route.
No hotrods I know of possibly a NOS Vesrah kit out there but, OE is the best choice. 

Offline heinig27

  • Trade Count: (0)
  • Newbie
  • **
  • Posts: 1
Re: Lt250 1985 after market crank questions
« Reply #2 on: August 10, 2017, 11:15:42 am »
Unfortunately as mentioned above there are no "aftermarket" cranks for the 85/86 LT's.  You can only rebuild them using either OEM stuff or Vesrah (what I used, found on ebay) and have a shop rebuild/press it back together.  My shop only charged $150 for this which I didn't think was too bad really.

Offline All American

  • How is holding onto all the 85 86 swingers???
  • Trade Count: (0)
  • Elite Member
  • **********
  • Posts: 1188
  • Gender: Male
  • NEEDIN 85 86 SWINGARMS
  • Location: MO
Re: Lt250 1985 after market crank questions
« Reply #3 on: November 06, 2017, 01:16:17 pm »
And as far as Iím know, there arenít any options to choose from.  It kind of suck, but this is a problem you are going to come across for almost anything aftermarket on an 85í or an 86í model.  Itís very limited.  I donít know if this will help you but there is a man who can build a hand coned,.. hammered pipe.  He can build a heat shield for it too.  All for around $600.00.  Now thatís a raw pipe price.  The heat shield and finishing is extra.  If you can afford that, you will have something truly special.  Pipes for these two years are very RARE.... the only pipes available are oem and fmf.  The guys name is Kenny Roberts out of Southern California and all he needs is a 85 or 86í model to build the pipe.  Fmf isnít that bad but I think there is a better option if you can afford it.
1-1985 SUZUKI LT250R
1-2013 HONDA TRX450ER

Offline Wutchanut

  • Trade Count: (0)
  • Newbie
  • **
  • Posts: 2
Re: Lt250 1985 after market crank questions
« Reply #4 on: December 02, 2017, 12:49:01 am »
I'm like you I want to know you I'm not sure in answer. I do not know what to say.

 

+- Suzuki Quadracer HQ Store Zone

http://www.suzukiquadracerhq.com/index.php?action=store