+-
« previous next »
Pages: [1]   Go Down

Author Topic: Lt 80- what breaks? And etc to look for?  (Read 786 times)

Offline

  • Trade Count: (0)
  • Green Horn
  • ***
  • Posts: 131
  • Gender: Male
  • Location: Spring Cypress TX
Lt 80- what breaks? And etc to look for?
« on: January 12, 2014, 01:35:36 pm »
Looking at a lt 80, actually kfx 80, tomorrow.  2005. Looks clean. Fmf pipe   What to look for, questions to ask, maintenance to be done etc?   He is asking 1300. I'm thinking more like 8-900. Thoughts?

For my son that turns 6 in couple weeks...
Logged
92/87 Hybrid
88 Zilla
bunch of other race quads

Share on Bluesky Share on Facebook

Offline

  • Trade Count: (0)
  • Weekend Warrior
  • ****
  • Posts: 230
Re: Lt 80- what breaks? And etc to look for?
« Reply #1 on: January 12, 2014, 01:44:53 pm »
The weak link on them is the engine cases as they are the rear shock pivot point. Look for bends cracks or welds on the cases.
Logged

Offline

  • Trade Count: (0)
  • Green Horn
  • ***
  • Posts: 85
  • Location: NorCal
Re: Lt 80- what breaks? And etc to look for?
« Reply #2 on: January 12, 2014, 04:14:00 pm »
Ya, the engine acts as part of the swing arm. Cracks/breaks usually occur just behind the engine. Also remove the chain cover and inspect. There is no system to tighten the chain and sprokets get chewed up quickly.
Logged
LT80
LT500
JP500
Laeger500
SandZilla 2.0

Offline

  • Trade Count: (0)
  • Elite Member
  • **********
  • Posts: 2209
  • Gender: Male
  • Location: ohio
Re: Lt 80- what breaks? And etc to look for?
« Reply #3 on: January 12, 2014, 05:51:11 pm »
bent foot pegs, they rust out under there to, start pulling on tires and wheels to see if a arms need bearings and wheels need bearings.
that will always help you get a better price when you start show him **** is bad and needs replaced.
Logged
life's journey is not to arrive at the grave safely in a well preserved body, but rather to skid in sidays totally worn out shouting "HOLY SH*T...WHAT A RIDE!"

Offline

  • Trade Count: (0)
  • Green Horn
  • ***
  • Posts: 78
Re: Lt 80- what breaks? And etc to look for?
« Reply #4 on: January 14, 2014, 07:38:11 am »
Look in front of the front sprocket for cracks.
See if the stock pipe comes with it. (I'd be putting it back on).
FYI: when I get one in, I rebuild the motor and go over everything. Depending on whether it has any goodies, I get 1000-1200.
Even if you pay 1300, it's cheap for a dependable machine that will last him for years.
Logged

Offline

  • Trade Count: (0)
  • Green Horn
  • ***
  • Posts: 131
  • Gender: Male
  • Location: Spring Cypress TX
Re: Lt 80- what breaks? And etc to look for?
« Reply #5 on: January 14, 2014, 08:14:50 am »
he wouldnt budge on his price and I just cant see paying that much when I have seen some go for literally half that price.  or I could get a DRR or Apex for about that much.   Damn thing was peppy too!  probably too much for a new rider, looking for a 50 now...
Logged
92/87 Hybrid
88 Zilla
bunch of other race quads

Offline

  • Trade Count: (0)
  • Green Horn
  • ***
  • Posts: 78
Re: Lt 80- what breaks? And etc to look for?
« Reply #6 on: January 14, 2014, 11:56:47 am »
"I could get a DRR or Apex for about that much."
If you can, you can make good money on them!

"Damn thing was peppy too!  probably too much for a new rider, looking for a 50 now..."
At 6 and a new rider, I consider you a very smart man. :)
Logged
Pages: [1]   Go Up
« previous next »
 

+- Suzuki Quadracer HQ Store Zone

http://www.suzukiquadracerhq.com/index.php?action=store