Author Topic: Twist throttle (Read 578 times)

Krewzilla235 · « **on:** January 04, 2014, 10:00:15 pm »

Anyone know where to get a twist throttle for a zilla I hate thumb throttles especially tryin to hold on that tight...too fast haha

Chuckie25 · « **Reply #1 on:** January 05, 2014, 12:07:19 am »

Motion Pro sells the turbo twisters. Looks like an old school Magura. You can find them for a steal on eBay most of the time. Finally someone else that can ride a twister!! LOL

GrkGuy · « **Reply #2 on:** January 05, 2014, 12:10:36 am »

if you buy a twist thrtl, get a 1/4 turn one. magura makes them,

Dezsled · « **Reply #3 on:** January 05, 2014, 06:57:36 am »

Magura 312 twist throttle has two settings ... Enduro 90* and a quicker ratio setting

Motion pro makes a couple, one a Gunnar gasser copy

And the old Gunnar gasser

Motion pro makes cables as does terrycable

Dangerouspower · « **Reply #4 on:** January 05, 2014, 09:03:21 am »

CJ I can ride a twist throttle I just hate them on a quad.

Glamisrider · « **Reply #5 on:** January 05, 2014, 09:14:59 am »

Quote from: Dezsled on January 05, 2014, 06:57:36 am

Magura 312 twist throttle has two settings ... Enduro 90* and a quicker ratio setting

The 312 is the old school metal one that they don't make any more the Magura 314 is the new plastic one that they are making. it is 91* or 103*

If you have a 44 or larger the Magura 312/314 on the short throw is the way to go.

One twist, no re-grip can get the whole throttle

QuadMan8 · « **Reply #6 on:** January 05, 2014, 09:15:15 am »

I tun the old gunner gasser (have for 20 years) the gunner gasser is like the motion pro turbo

magura 314--on the plus side it can be set up for a 1/4 turn quick throttle which I like since you can grab full throttle withour having to over rotate your wrist. on the minus side it is all plastic and does not feel as precdise. Also this throttloe has no screw adjustment to take up cable slack which makes this throittle a no go for me as not all my cables have adjustments in the cable and there is usually not enough adjustment in the carb alone.

the motion pro turbo. disadvantage is its more than 1/4 turn and getting full throttle requires a little more wrist twist han I prefer.
Pros--it is much better built. has metal not plastic. can be polished or powder coated. a threaded adjustment bolt/nut to get precise free play. Its my fav.

Glamisrider · « **Reply #7 on:** January 05, 2014, 09:19:18 am »

Quote from: QuadMan8 on January 05, 2014, 09:15:15 am

Also this throttloe has no screw adjustment to take up cable slack which makes this throittle a no go for me as not all my cables have adjustments in the cable and there is usually not enough adjustment in the carb alone.

If you order from motion pro a motion pro cable specific for your bike, your carb (for the correct free length), & the 314, the adjustment is built in to the cable.

Motoman991 · « **Reply #8 on:** January 05, 2014, 12:00:30 pm »

I run a Dual Gasser on my hybrid. Twist and thumb. Best of both.

Dezsled · « **Reply #9 on:** January 05, 2014, 02:41:17 pm »

Old timers like myself have seen the black throttle tube for Gunnar gassers that are for the 44 mikuni. Use it with a 39pwk and it's like 1/8 turn!

News:

Author Topic: Twist throttle (Read 578 times)

Krewzilla235

Twist throttle

Chuckie25

Re: Twist throttle

GrkGuy

Re: Twist throttle

Dezsled

Re: Twist throttle

Dangerouspower

Re: Twist throttle

Glamisrider

Re: Twist throttle

QuadMan8

Re: Twist throttle

Glamisrider

Re: Twist throttle

Motoman991

Re: Twist throttle

Dezsled

Re: Twist throttle

Suzuki Quadracer HQ Store Zone