clutch slipping i think

• clutch slipping i think
  Posted by 87zillaman on 25 Aug, 2015 17:09
• ok so lt 500 when i shift into 3 and get on it. its all most like the clutch is slipping i think because it revs allmost like there is no load on the engine and its like its stops pulling hard. do you think it sounds like the clutches
• 
  
• #1 Reply
  Posted by Rainman56 on 26 Aug, 2015 18:22
• Does it do it in 4th or 5th?
• 
  
• #2 Reply
  Posted by 87zillaman on 27 Aug, 2015 15:33
• yes
• 
  
• #3 Reply
  Posted by Glamisrider on 28 Aug, 2015 06:29
• If your plates are all within spec. (Spec can be found in the manual).
  
  Get a set of 6 Barnett 85/86 lt250 springs and you'll be good to go up to 70 HP.
  
  You can also run OEM 85/86 springs but there just a tad shorter and don't have as long of throw.
  
  
  
  
  
  
  
• 
  
• #4 Reply
  Posted by Rainman56 on 28 Aug, 2015 07:50
• Definitely sounds like clutch slipping.Generally with higher the gear you go the more slippage you,ll get.
•