I'm gonna bore my carb. I was just gonna see if anyone knows exactly how much you can go without running into problems. I think I herd 42.5
I think Jerry does his at 41.5, I have a Q 42.5 but they have to be epoxied then. I would go with 41.5.
So I can straight bore it to 41.5 with no problems?
With no problems, 41. ,a little epoxy possibly needed anything past that.
some shops measure at different locations so you get different #s and their some variations in the casting process of the carbs from the manufacturer so sometimes the amount you can remove is different. also, some shops do not like to bore out the carb so much that it leaves the walls paper thin. 41.xx mm will be about the max before you need to build up the walls such as with some form of epoxy cement like ice man suggested but at that point you can just buy a larger carb