+-
« previous next »
Pages: [1]   Go Down

Author Topic: transmission only has first gear need help!!!  (Read 379 times)

Offline

  • Trade Count: (0)
  • Newbie
  • **
  • Posts: 12
transmission only has first gear need help!!!
« on: April 13, 2014, 08:03:05 am »
I replaced to shift shaft seal and slid the shift fork out enough to pop the old seal out and put in the new one and slid the shift shaft back in, obviously I screwed something up. is there a way that meshes up with the shifting teeth? please help me out heading on a trip Tuesday night!!!! Thanks ahead of time!!! <1>
Logged

Share on Bluesky Share on Facebook

Offline

  • 1991 Lt250r
  • Trade Count: (0)
  • Elite Member
  • **********
  • Posts: 1350
  • Gender: Male
  • Location: West Virginia
Re: transmission only has first gear need help!!!
« Reply #1 on: April 13, 2014, 08:22:39 am »
Teeth on shifter shaft have to line up in the middle of the teeth on shiftimg drum. If you replace that,always check to see if it shifts before putting clutch cover on. Also when you take clutch cover off you have to watch from pushing  shifting shaft out of place since clutch cover holds it in place.
Logged
91 Lt250r Bartlett port and head mod v force 2 Hinson Clutch Basket Cool Head Scp Pipe and silencer ,KN air filter ,EBC clutch, Ohlins  Triple rate Shocks Redone by PEP Shocks,Stock Rear Shock Redone By Pep Shock,  DG nerf Bars , Lonestar axle 2+2,Lonestar Swingarm ,Douglas Red Label rims.

Offline

  • Trade Count: (0)
  • Elite Member
  • **********
  • Posts: 2493
  • Gender: Male
  • Location: Cincinnati OH
Re: transmission only has first gear need help!!!
« Reply #2 on: April 13, 2014, 10:09:30 am »
What ^he^ said. I replaced my shift shaft seal and just used a hooked pick tool and pushed the new one in with a flat surfaced punch tool.
Logged

Offline

  • Trade Count: (0)
  • Forum Moderator
  • Pro Member
  • *********
  • Posts: 860
  • Gender: Male
  • Location: SoCal
Re: transmission only has first gear need help!!!
« Reply #3 on: April 13, 2014, 12:43:22 pm »
LT250RWV is right.

if you look under the clutch basket there is a shift pawl with 5 slots in it.  You want the middle of the shift shaft pawl to line up with the middle of the transmission shift pawl.

If you get down and look under the clutch basket you can see it back in there.

Logged

Offline

  • Trade Count: (0)
  • Newbie
  • **
  • Posts: 12
Re: transmission only has first gear need help!!!
« Reply #4 on: April 14, 2014, 09:02:02 pm »
 w+ thanks guys!!!
Logged
Pages: [1]   Go Up
« previous next »
 

+- Suzuki Quadracer HQ Store Zone

http://www.suzukiquadracerhq.com/index.php?action=store