Author Topic: Adjusting powervalve (Read 1748 times)

Petenorth · « **on:** November 17, 2012, 04:30:28 pm »

How do you adjust the powervalve correctly? Once you put the cylinder on, hook the rod up. Start from there please. Thanks

Dezsled · « **Reply #1 on:** November 17, 2012, 04:45:47 pm »

Yeah ...preloading the spring ? Double oring the chingas...?

Dust360 · « **Reply #2 on:** November 17, 2012, 04:51:39 pm »

turn the spring counter clockwise 1 turn after pulling cover off and it is sitting in non-running position

Reddog815 · « **Reply #3 on:** November 17, 2012, 04:56:41 pm »

I snapped the page in the manual.

Petenorth · « **Reply #4 on:** November 17, 2012, 05:18:45 pm »

Thanks for the info. Do you you do anything on the side with the window other than hook the rod up?

Mitch Keller · « **Reply #5 on:** November 17, 2012, 06:07:37 pm »

Heck I cant remember was it to tighten the spring Clockwise or Counter Clockwise?

WestTexasKing · « **Reply #6 on:** November 17, 2012, 06:37:34 pm »

Nope, just hook the rod up to the powervalve and install the window.
From there, index the cap to the spring with the powervalve in the open position, turn it 1-2 turns CCW depending on your pipe.
Search the forum for my post on how to fine tune the powervalve to your engine and pipe.

News:

Author Topic: Adjusting powervalve (Read 1748 times)

Petenorth

Adjusting powervalve

Dezsled

Re: Adjusting powervalve

Dust360

Re: Adjusting powervalve

Reddog815

Re: Adjusting powervalve

Petenorth

Re: Adjusting powervalve

Mitch Keller

Re: Adjusting powervalve

WestTexasKing

Re: Adjusting powervalve

Suzuki Quadracer HQ Store Zone