Author Topic: 87Lt500 second gear issue (Read 458 times)

ZillaHp · « **on:** July 25, 2014, 11:23:12 pm »

87 lt500 great condition. Runs good won't stay in second gear. I can launch out of first hit second
Pull then it slips into neutral. Something is wrong with second gear no visible
Damage to trans. Any help would be great.

El Diablo · « **Reply #1 on:** July 26, 2014, 10:27:51 am »

It's typical. You need the gears either replaced or the dogs re-cut. Hit up Greg Whittaker at W-C-R.

Buckeye513 · « **Reply #2 on:** July 26, 2014, 10:55:24 am »

Hey what happened to my post?

ZillaHp · « **Reply #3 on:** July 28, 2014, 07:10:20 am »

Thanks guys!! I looking to have them welded an re cut. If one gear is bad all might be bad so I'm doing the whole trans as of now.

El Diablo · « **Reply #4 on:** July 28, 2014, 01:55:08 pm »

I wouldn't do any welding to the gears as this would affect the temper of the steel.

Toydoc · « **Reply #5 on:** July 31, 2014, 01:01:45 am »

I'd Google "Greg Whittaker at WCR" before I shipped anything

News:

Author Topic: 87Lt500 second gear issue (Read 458 times)

ZillaHp

87Lt500 second gear issue

El Diablo

Re: 87Lt500 second gear issue

Buckeye513

Re: 87Lt500 second gear issue

ZillaHp

Re: 87Lt500 second gear issue

El Diablo

Re: 87Lt500 second gear issue

Toydoc

Re: 87Lt500 second gear issue

Suzuki Quadracer HQ Store Zone