Author Topic: engine case inserts for swing arm bolt missing? (Read 466 times)

SuperNutt · « **on:** December 05, 2014, 07:06:36 pm »

Where can I find these engine case bushings for the swing arm bolt? I don't see them listed on the suzuki parts diagram. Some of my engine cases have them in them and some do not? Any help or ideas would be appreciated. Thanks.

Glamisrider · « **Reply #1 on:** December 05, 2014, 08:52:24 pm »

I think those are home made.

From the looks of it someone machined the cases and put swing arm spacer in there.

If I'm right they look like part #6 on the swing arm fiche.
http://www.suzukipartshouse.com/oemparts/a/suz/50d092b6f870022e9cc419f4/rear-swinging-arm-model-j-k-l

Lets see some pictures of the actual bushing and get some dimensions to confirm those are it.

Iceracer · « **Reply #2 on:** December 06, 2014, 03:15:29 pm »

All the cases have a cast in piece for the swingarm to ride in. Sometimes they come loose and come out.

Twinzilla · « **Reply #3 on:** December 06, 2014, 04:32:44 pm »

I don't believe they're available form Suzuki...you're going to have to have some made.

Glamisrider · « **Reply #4 on:** December 06, 2014, 07:01:46 pm »

I didn't realize those where cast in to the cases., learn something new everyday.

SuperNutt · « **Reply #5 on:** December 06, 2014, 08:47:43 pm »

I tried to get one out of a case I have laying around. I warmed up the case on the wood stove and still couldnt budge the insert. So I gave up. I will have to figure something else out as the case that I want to use is the one that is missing the insert. I tried a swing arm pivot bushing and that didn't fit. SO if anyone has one laying around, let me know. I sure could use one....

Iceracer · « **Reply #6 on:** December 07, 2014, 02:13:36 pm »

They don't come out. Unless there f'ed up.

SuperNutt · « **Reply #7 on:** December 07, 2014, 05:56:45 pm »

So basically this case half is junk then? Or can someone maybe make a bushing for it?

GrkGuy · « **Reply #8 on:** December 07, 2014, 08:13:36 pm »

Just put a big washer on it.

Or send me the cases and I will.

Kreidy818 · « **Reply #9 on:** December 08, 2014, 07:34:00 am »

Find a junk case and cut it out with a dremel. That's what I had to do

SuperNutt · « **Reply #10 on:** December 08, 2014, 07:16:56 pm »

I have another case here but it is still useable. I will see if I can come up with a junk case and cut one out. That is a good idea. A washer would probably work in a pinch too. I might be able to make something like that if I had to.. Thanks for the replys..

News:

Author Topic: engine case inserts for swing arm bolt missing? (Read 466 times)

SuperNutt

engine case inserts for swing arm bolt missing?

Glamisrider

Re: engine case inserts for swing arm bolt missing?

Iceracer

Re: engine case inserts for swing arm bolt missing?

Twinzilla

Re: engine case inserts for swing arm bolt missing?

Glamisrider

Re: engine case inserts for swing arm bolt missing?

SuperNutt

Re: engine case inserts for swing arm bolt missing?

Iceracer

Re: engine case inserts for swing arm bolt missing?

SuperNutt

Re: engine case inserts for swing arm bolt missing?

GrkGuy

Re: engine case inserts for swing arm bolt missing?

Kreidy818

Re: engine case inserts for swing arm bolt missing?

SuperNutt

Re: engine case inserts for swing arm bolt missing?

Suzuki Quadracer HQ Store Zone