+-
« previous next »
Pages: [1]   Go Down

Author Topic: Rear swingarm bearing replacement  (Read 325 times)

Offline MrTDogg

  • Trade Count: (0)
  • Newbie
  • **
  • Posts: 3
Rear swingarm bearing replacement
« on: May 05, 2016, 09:11:40 pm »
Which way do rear swing arm bearings go in. One side has a lip with numbers stamped on it got side tracked and can't remember if lip with numbers goes inside or outside any help would be appreciated 1989 lt 500
Logged

Share on Facebook Share on Twitter

Offline Rensch26

  • Trade Count: (0)
  • Newbie
  • **
  • Posts: 33
Re: Rear swingarm bearing replacement
« Reply #1 on: May 06, 2016, 10:10:47 am »
I did mine a few months ago and I don't remember there being a difference between one end or the other. As long as both ends of the bearing have a lip on them you can tap them in with a socket and don't have to worry about damaging the needle bearings or having them fall out.
Logged

Offline MrTDogg

  • Trade Count: (0)
  • Newbie
  • **
  • Posts: 3
Re: Rear swingarm bearing replacement
« Reply #2 on: May 06, 2016, 10:35:07 pm »
Ok thanks I bought stock OEM bearings and one side has a noticeably bigger lip which has numbers stamped on it maybe there's a difference between OEM and aftermarket but I did manage to talk to a  mechanic and he said the numbers almost always go to the outside for OEM
Logged
Pages: [1]   Go Up
« previous next »
 

+- Suzuki Quadracer HQ Store Zone

http://www.suzukiquadracerhq.com/index.php?action=store