Some pictures of the 1st article Slip On 05mm Camber Spacers being made, some small changes to be done, but I must say I like the way these turned out, Working on the cost now, these will work with the OEM bolts, but it seems some of you want 5mm longer bolts and I am looking into this.
Made From 7175 Aluminum, can be polished, painted, or Powder Coated, will be sold raw
I think that's the way to go. Never did the camber mod because I thought it lessened the resale value of the a arms.
I would be willing to try these out.
Look sweet!! Do they NEED to have longer bolts? Anyone tested and failed using stock bolts w/ spacers?
I would think the stock bolts would work beings your only adding about a 1/4" spacer???
I think the bolt is long enough. I would try them.
Is there any worry of them breaking apart right at the two trimmed off sections? They seem to be thinnest at that point and didnt know if it would form a crack. Just wondering.
If you look at the pictures, each end fits into each other, figure once you tighten the back bolt and the spacer is snugly fitted into each groove as one solid piece plus there is nothing to move to a crack, the CNC ends are only to align the Ball Joint in the proper position on the A Arm.
sure hope that they dont fail and no one trys to sue you.
sure hope that they dont fail and no one trys to sue you.
The Dark Cloud of John had to show up, well fine, guess I will have to write a doc saying DCS or myself has no liability , please sign here.
Thanks John.
When you figure up a price ill sign that waiver and ill take a set of those.
Still cant find a longer flange bolt, the hex heads are huge 22mm vs the OEM head of 17mm, looking at going to Allan heads
If I remember correctly I bought a zilla for parts from a member from the other site and it had these shims installed but they had stress cracks. I do not know if I still have these shims lying in a box or if I threw them out. I am gonna see if I still have them and post a pic.
If I remember correctly I bought a zilla for parts from a member from the other site and it had these shims installed but they had stress cracks. I do not know if I still have these shims lying in a box or if I threw them out. I am gonna see if I still have them and post a pic.
First off, These are made from my CAD drawings no one elses, material is 7175 not the cheap aluminum, plus parts were tumbled to take away any sharp edges that could lead to cracks, it took less than 15 mins to install these shims
7175 is a high strength, heat treatable, forging alloy. It has an excellent combination of toughness and strength, similar to 7075 alloy except that the 7175 version has superior toughness and tensile strength.
OK Kits are ready, Kit includes 2 CNC 7175 spacers, 2 Hex Head (22mm) x 40mm long Bolts (OEM is 30mm), 2 washers 14mm ID x 28mm, $49.95 Shipped all USA
Only Made 25 sets, these should work also on the 250s, I offer a 30 day change of mind guarantee, your not happy with this kit within 30 days from time of purchase, just return the kit at your cost and once received I will refund your money.
Contact me, my Pay pal erbe@diecutsolutions.com
Kits will be in the store tonight, and E bay, hope you folks enjoy them.
Ordered mines today!! With all my bearings and new ball joints and a spec bolt 250 pc bolt/washer kit! Roller will be together by next weekend if all goes well!
Crap! Trimmed my a-arms a couple of weeks ago
Ordered my set Sunday an they arrived today! Super fast shipping two thumbs up for Mitch!
Get em on and tell us your thoughts!~Remember the 4mm side to the A Arms, 5mm side to the Ball Joint.
Get a before and after picture of the wheels too.
