+-
« previous next »
Pages: [1]   Go Down

Author Topic: do it yourself grab bar !  (Read 625 times)

Offline

  • Trade Count: (0)
  • Weekend Warrior
  • ****
  • Posts: 162
  • Gender: Male
  • who brakes later is more quickly
  • Location: Germany
do it yourself grab bar !
« on: March 27, 2014, 10:42:21 am »
I must build for the German TÜV
( Technical Overwatch team)
 a grab bar for me and my girlfriend  to drive on the road.
someone has built and can tell me, the measurments ?.
 Greetings Frank
Logged
under-steers is when you see the tree the goes in. overrides is when you hear the tree which you were going on.
"Walther Röhrl "

Share on Bluesky Share on Facebook

Offline

  • Trade Count: (0)
  • Pro Member
  • ********
  • Posts: 915
  • Location: Cincinnati, Oh
Re: do it yourself grab bar !
« Reply #1 on: March 27, 2014, 11:10:01 am »
What kind of grab bar are you wanting to build?  The only measurements that are needed are the mounting points on the frame and what size bolt holes are needed.
Logged

Offline

  • Trade Count: (0)
  • Forum Moderator
  • Elite Member
  • *********
  • Posts: 2058
Re: do it yourself grab bar !
« Reply #2 on: March 27, 2014, 03:40:28 pm »
I can get pics with a measuring tape? Let me know if these are what you need

Logged
87 HPR LT500
04 Roll LOBO II TRX250R
06 LTR450
87 LT500
85 & 86 LT250
86 & 87 TRX250R
07 & 09 Husqvarna TE450
00 CR125R

Offline

  • Trade Count: (0)
  • Weekend Warrior
  • ****
  • Posts: 162
  • Gender: Male
  • who brakes later is more quickly
  • Location: Germany
Re: do it yourself grab bar !
« Reply #3 on: March 27, 2014, 11:21:32 pm »
Jes exactly that .... I mean! thank you!
 I can not measure itself.
 because my bike stands at TÜV .
 now I need only the length of the fender.
 because I have to bend a bit high ... so that the can hold my Gf on it ...
 usually to the hold on to me!!!
But the TÜV think if we even understand ourselves not as good ... then they can hold on to at least grabbar  ;-)

Like this...


Logged
under-steers is when you see the tree the goes in. overrides is when you hear the tree which you were going on.
"Walther Röhrl "

Offline

  • Trade Count: (0)
  • Forum Moderator
  • Elite Member
  • *********
  • Posts: 2058
Re: do it yourself grab bar !
« Reply #4 on: March 28, 2014, 12:21:07 am »
Frank your girlfriend has awesome lungs!

Length of the fender hmmmm.... Not understanding that one

Use your gf pic to clue me in.... Man she's hot P*

Are you trying to make a sissy bar (back rest?)
Logged
87 HPR LT500
04 Roll LOBO II TRX250R
06 LTR450
87 LT500
85 & 86 LT250
86 & 87 TRX250R
07 & 09 Husqvarna TE450
00 CR125R

Offline

  • Trade Count: (0)
  • Weekend Warrior
  • ****
  • Posts: 162
  • Gender: Male
  • who brakes later is more quickly
  • Location: Germany
Re: do it yourself grab bar !
« Reply #5 on: March 28, 2014, 12:48:44 am »
not a sissy bar HeHe
 I thought behind the plastic has a bend at a 45 degree angle coming up ...
 maybe 20cm in the near of her a.. :-)
Logged
under-steers is when you see the tree the goes in. overrides is when you hear the tree which you were going on.
"Walther Röhrl "

Offline

  • Trade Count: (0)
  • Elite Member
  • **********
  • Posts: 2493
  • Gender: Male
  • Location: Cincinnati OH
Re: do it yourself grab bar !
« Reply #6 on: March 28, 2014, 04:34:32 am »
He's wanting to know how far out on the rear grab bar do the plastic cover when installed so he can bend the exposed portion of the grab bar up to create a back rest looking place for his passenger to hold onto.

Frank I'm assuming you have a stock rear grab bar correct? Or are you fabbing one up from scratch (nothing)?
Logged

Offline

  • Trade Count: (0)
  • Weekend Warrior
  • ****
  • Posts: 162
  • Gender: Male
  • who brakes later is more quickly
  • Location: Germany
Re: do it yourself grab bar !
« Reply #7 on: March 28, 2014, 07:10:30 am »
This is correct
I have nothing !
Logged
under-steers is when you see the tree the goes in. overrides is when you hear the tree which you were going on.
"Walther Röhrl "

Offline

  • Trade Count: (0)
  • Elite Member
  • **********
  • Posts: 2493
  • Gender: Male
  • Location: Cincinnati OH
Re: do it yourself grab bar !
« Reply #8 on: March 28, 2014, 07:32:34 am »
Ok so you need to know how far from the mounting points is it to the edge of the rear plastic behind the seat so you can bend the bar up at that point?
Logged

Offline

  • Trade Count: (0)
  • Forum Moderator
  • Elite Member
  • *********
  • Posts: 2058
Re: do it yourself grab bar !
« Reply #9 on: March 28, 2014, 07:39:53 am »
Frank you're lucky, here in the USA your not allowed to ride with a passenger unless the atv is designed so. I can get what you need after breakfast
Logged
87 HPR LT500
04 Roll LOBO II TRX250R
06 LTR450
87 LT500
85 & 86 LT250
86 & 87 TRX250R
07 & 09 Husqvarna TE450
00 CR125R

Offline

  • Trade Count: (0)
  • Elite Member
  • **********
  • Posts: 2493
  • Gender: Male
  • Location: Cincinnati OH
Re: do it yourself grab bar !
« Reply #10 on: March 28, 2014, 07:48:47 am »
As always, Dez is the man!
Logged

Offline

  • Trade Count: (0)
  • Weekend Warrior
  • ****
  • Posts: 162
  • Gender: Male
  • who brakes later is more quickly
  • Location: Germany
Re: do it yourself grab bar !
« Reply #11 on: March 28, 2014, 08:55:54 am »
16:48 at night ... I've Equals Feierabend Yay!
please give me the Masurement that I can build the part about the weekend ... Frank
Logged
under-steers is when you see the tree the goes in. overrides is when you hear the tree which you were going on.
"Walther Röhrl "

Offline

  • Trade Count: (0)
  • Forum Moderator
  • Elite Member
  • *********
  • Posts: 2058
Re: do it yourself grab bar !
« Reply #12 on: March 28, 2014, 09:00:28 am »
Here you go  +k2

Logged
87 HPR LT500
04 Roll LOBO II TRX250R
06 LTR450
87 LT500
85 & 86 LT250
86 & 87 TRX250R
07 & 09 Husqvarna TE450
00 CR125R

Offline

  • Trade Count: (0)
  • Weekend Warrior
  • ****
  • Posts: 162
  • Gender: Male
  • who brakes later is more quickly
  • Location: Germany
Re: do it yourself grab bar !
« Reply #13 on: March 28, 2014, 01:25:59 pm »
Thank you! now I have the exact measurements for me to build the part, as soon as the TÜV approved it I'll do pictures or rotating a clip, of course with Gf, I just hope it's not too offensive for the U.S. ... thanks again if I could I would send you 100 liters of beer. Frank

Logged
under-steers is when you see the tree the goes in. overrides is when you hear the tree which you were going on.
"Walther Röhrl "

Offline

  • Trade Count: (0)
  • Forum Moderator
  • Elite Member
  • *********
  • Posts: 1389
  • Gender: Male
  • Location: NWA
Re: do it yourself grab bar !
« Reply #14 on: March 28, 2014, 01:46:29 pm »
Quote from: Frank on March 28, 2014, 01:25:59 pm
Thank you! now I have the exact measurements for me to build the part, as soon as the TÜV approved it I'll do pictures or rotating a clip, of course with Gf, I just hope it's not too offensive for the U.S. ... thanks again if I could I would send you 100 liters of beer. Frank



I think i speak for most here when i say you're welcome to post as many pics as you want Frank!
Logged

Offline

  • Trade Count: (0)
  • Elite Member
  • **********
  • Posts: 2209
  • Gender: Male
  • Location: ohio
Re: do it yourself grab bar !
« Reply #15 on: March 28, 2014, 02:43:19 pm »
looks like she had a reduction. WHY???? lol
Logged
life's journey is not to arrive at the grave safely in a well preserved body, but rather to skid in sidays totally worn out shouting "HOLY SH*T...WHAT A RIDE!"

Offline

  • Trade Count: (0)
  • Forum Moderator
  • Elite Member
  • *********
  • Posts: 2058
Re: do it yourself grab bar !
« Reply #16 on: March 28, 2014, 06:17:46 pm »
God I hate to think of her lung power reduced......  ;D

Frank uhhh I wear glasses to read with just to warn you. You better be tacking your modification together and checking the fit before burning in the final welds.... Just a warning ! Post up your grab bar! And yer babe!

 P*  P*  P*

Logged
87 HPR LT500
04 Roll LOBO II TRX250R
06 LTR450
87 LT500
85 & 86 LT250
86 & 87 TRX250R
07 & 09 Husqvarna TE450
00 CR125R
Pages: [1]   Go Up
« previous next »
 

+- Suzuki Quadracer HQ Store Zone

http://www.suzukiquadracerhq.com/index.php?action=store