+-

Author Topic: 87 motor w/ cool head in 88+ frame. Can't install spark plug  (Read 543 times)

Offline LT500R

  • Trade Count: (0)
  • Newbie
  • **
  • Posts: 2
87 motor w/ cool head in 88+ frame. Can't install spark plug
« on: October 10, 2019, 07:00:38 am »
As the title states i can't get the spark plug into the motor because the frame is in the way. I am assuming if i had a stock head there wouldn't be an issue but i have the pro design cool head on it and its taller than stock... anyone have similar issue or have this setup with no issues? Driving me nuts that i may need to buy a stock head now. Anyone have both 87 and 88+ head that they can take a picture side by side? thanks in advance. So close to firing it up but can't without spark!!!

Share on Facebook Share on Twitter


Offline MotorGeek - Jerry Hall

  • Trade Count: (0)
  • Pro Member
  • ********
  • Posts: 858
The spark plug usually goes into the dome at an angle.  You must rotate the dome so that it is pointed in the right direction so that it clears the frame. 

 

+- Suzuki Quadracer HQ Store Zone

http://www.suzukiquadracerhq.com/index.php?action=store