Hi there lads,

did a complete rebuild on my Zilla, the only thing which gives me headaches is the little brake stay bracket on the swinger.

Either the hole of the bracket is f´ed up (grew bigger) or the bolt that goes thru it, is a little eaten up / grinded ?
hence when i hit the rear brake, it clics and clacs on me, since it has a tiny bit of play due to the above described state.

is that a known problem and is there a fix for that ? ah knows that theres a new brake bracket available, but I just dunno if its the bracket or the bolt

any help would be deeply appreciated ...

The rear brake on my hybrid has always moved a tiny bit because of the bracket.  You should be able to see if the bolt is messed up, if that's the issue.  This probably doesn't help much lol.

just checked and measured today again. special bolt that goes thru is grinded down fpr sure by 1-2 mm ... wtf ...

now just checked megazip.net and all the other part providers but that bol especially seems to be discontinued. nothin’ on fleabay.

anyone got a spare one and willing to part ?!?

gimme a hand here folks ...

that’ll help I guess 🤙🏽🙏🏽✌🏽 ... may thanks mate !!!!