+-

Author Topic: Front Geometry Question  (Read 856 times)

Offline Decible

  • Trade Count: (0)
  • Newbie
  • **
  • Posts: 8
Front Geometry Question
« on: January 06, 2024, 11:28:32 pm »
Iím about to start a restoration project on my 92 ltr. Since I will be tearing it down, did any companies (without doing hybrid grafts) ever solve the arching problems with bumpsteer? Or is that just inherently engineered into the frame due to where the a-arms attach at the frame and tire rods?

Share on Facebook Share on Twitter


Offline Rainman56

  • Trade Count: (0)
  • Elite Member
  • **********
  • Posts: 1282
  • Location: Ontario,Great White North
Re: Front Geometry Question
« Reply #1 on: January 11, 2024, 11:22:15 am »
Iím about to start a restoration project on my 92 ltr. Since I will be tearing it down, did any companies (without doing hybrid grafts) ever solve the arching problems with bumpsteer? Or is that just inherently engineered into the frame due to where the a-arms attach at the frame and tire rods?

There used to be some kits to correct/improve the bumpsteer issues.Not sure if he is still making them though...
Can,t fix stupid.:)

Offline Andys92

  • Trade Count: (0)
  • Range Rover
  • *****
  • Posts: 468
  • Gender: Male
  • Location: roscoe NY
Re: Front Geometry Question
« Reply #2 on: January 17, 2024, 05:48:01 pm »
The only thing was to swap the steering horns left to right right to left and flip them over.
Lonestar outlaw lrd ported 265 national ,custom dynoport exhaust etc
1992 hybrid,Bartlett trail port ,custom dynoport
Lonestar lt250. Bartlett 285 with curtis sparks porting and custom dynoport

Offline Decible

  • Trade Count: (0)
  • Newbie
  • **
  • Posts: 8
Re: Front Geometry Question
« Reply #3 on: January 27, 2024, 10:26:37 pm »
Iím about to start a restoration project on my 92 ltr. Since I will be tearing it down, did any companies (without doing hybrid grafts) ever solve the arching problems with bumpsteer? Or is that just inherently engineered into the frame due to where the a-arms attach at the frame and tire rods?

There used to be some kits to correct/improve the bumpsteer issues.Not sure if he is still making them though...

Yeah, not a lot of aftermarket support anymore is what Iím noticing 🥴

 

+- Suzuki Quadracer HQ Store Zone

http://www.suzukiquadracerhq.com/index.php?action=store