Lt250r with z400 spindles and brakes?

• Lt250r with z400 spindles and brakes?
  Posted by Lt250quad-brid on 07 Jan, 2014 21:09
• Can z400 front spindles/brakes and all that bolt onto the stock 87 lt a-arms? If not what can?
• 
  
• #1 Reply
  Posted by LT250RWV on 07 Jan, 2014 21:15
• Their is a thread about this. type it in on the search bar and see if it comes up.
• 
  
• #2 Reply
  Posted by Dangerouspower on 07 Jan, 2014 21:16
• I doubt it will search feature is terrible on this forum..
• 
  
• #3 Reply
  Posted by LT250RWV on 07 Jan, 2014 21:19
• Yea I just tried and it wouldnt find nothing about it. My bad on the suggestion
• 
  
• #4 Reply
  Posted by Dezsled on 07 Jan, 2014 21:38
• I know this was done on a 500. Someone posted a pic and the suspension travel was reduced because of ball joint bind.
  
  I would like to see if this can be done. I have all Honda pattern rims
• 
  
• #5 Reply
  Posted by Lt250quad-brid on 08 Jan, 2014 05:35
• I've heard it can be done but I can't find much on it and if I find anything I'll post it up
• 
  
• #6 Reply
  Posted by LT250RWV on 08 Jan, 2014 05:46
• I know of people using yfz hubs
• 
  
• #7 Reply
  Posted by Gillio on 08 Jan, 2014 06:47
• I'm running yfz hubs. Just had to shim the caliper with a few washers. As far as z400 goes. I have one in my garage I'm going to be replacing the spindle on. Maybe I'll try to mock it up and see what's up.
• 
  
• #8 Reply
  Posted by Fibb250 on 17 Apr, 2018 16:14
• Anyone try this yet? I'm running yfz front hubs and read that the yfz calipers fit the z400 spindle and would like to run that setup if possible.
• 
  
• #9 Reply
  Posted by Motoman991 on 18 Apr, 2018 04:23
• I'm currently in the process of putting 400ex spindles and hubs with yfz450 calipers on mine.  The dual piston yfz450 calipers bolt right onto the 400ex spindles.  To get the 400ex spindles to work I had to get a set of lower balljoints that are for aftermarket 400ex arms.  This should be quite the upgrade.  Way way better braking and much better wheel selection.  I need to get that thing done, the weather is finally starting to get better.
 Like x 1  View List
• 
  
• #10 Reply
  Posted by Q2W on 19 Apr, 2018 09:05
• Please post something up when you do!
• 
  
• #11 Reply
  Posted by Fibb250 on 19 Apr, 2018 10:13
• You know if the yfz hubs will fit ex spindle? I ask because I'm kinda locked in to 4/156 due to jus buying my second set of wheels and my rear is yfz so it jus makes things easier. Where do you get these lower ball joints? I also have lonestar arms if that makes a difference..
• 
  
• #12 Reply
  Posted by Motoman991 on 19 Apr, 2018 11:59
• I wouldn't know about the YFZ hubs on 400ex spindles.  The brand of arm shouldn't make a difference.  I have Laeger's on mine and they take OEM lower ball joints.  I assume LSR arms would be the same.  The lower ball joints I got to put the 400ex spindles on are these https://www.ebay.com/itm/TRX-450R-400EX-400X-Pair-Lower-Ball-Joint-fits-Aftermarket-A-Arms-Alba-Racing/192212656010?epid=12002739677&hash=item2cc0c45f8a:g:YicAAOSwwzhZOuMs&vxp=mtr
• 
  
• #13 Reply
  Posted by Fibb250 on 19 Apr, 2018 15:00
• Ok thanks. I appreciate the info. I looked on lsr's site earlier and they were $125 ea. Maybe I'll try to find a cheap spindle on eBay to try a yfz hub on ex spindle
 Informative x 1  View List
•