+-

Author Topic: 1987 LT250R Lower front shock bushings?  (Read 605 times)

Offline Rainman56

  • Trade Count: (0)
  • Elite Member
  • **********
  • Posts: 1198
  • Location: Ontario,Great White North
1987 LT250R Lower front shock bushings?
« on: June 17, 2017, 02:49:29 pm »
Anyone know if lower front shock bushings are available for stock front shocks on an 87 LT250R?
Can,t fix stupid.:)

Share on Facebook Share on Twitter


Offline Nekrofilliak

  • Trade Count: (0)
  • Green Horn
  • ***
  • Posts: 92
Re: 1987 LT250R Lower front shock bushings?
« Reply #1 on: June 19, 2017, 12:06:21 pm »
No, you have to produce one from teflon or whatever....
The front shock come complete, sadly the bushing is not a service part ...
88 Lt250r.
79 Lawnboy 21" ;-P

Offline mike42

  • Trade Count: (0)
  • Newbie
  • **
  • Posts: 9
Re: 1987 LT250R Lower front shock bushings?
« Reply #2 on: May 19, 2018, 08:28:23 pm »
No, you have to produce one from teflon or whatever....
The front shock come complete, sadly the bushing is not a service part ...

Could you explain how to do this?

Offline Quadracer777

  • Idiot Hole Enthusiast
  • Trade Count: (0)
  • Green Horn
  • ***
  • Posts: 55
  • Gender: Male
  • Location: Washington State
Re: 1987 LT250R Lower front shock bushings?
« Reply #3 on: May 20, 2018, 06:51:00 pm »
A good local hardware store should have Teflon (or equivalent) bushings. then just fine the closest correct out side diameter. If the inside diameter is to large another bushing can be used inside the first. Preferably the hole will be too small and then you just need to enlarge the hole.  The best and only truly correct way would be to buy the exact right size from online or take some Teflon round stock and machine it to the correct dimensions.

 

+- Suzuki Quadracer HQ Store Zone

http://www.suzukiquadracerhq.com/index.php?action=store